Reset Monitors
TC1278/TC1279
3-Pin Reset Monitors for 5V Systems
Features
• • • • • • Precision VCC Monitor for 5.0V System Supplies 25...
Description
TC1278/TC1279
3-Pin Reset Monitors for 5V Systems
Features
Precision VCC Monitor for 5.0V System Supplies 250msec Minimum RESET Output Duration Output Valid to VCC = 1.2V VCC Transient Immunity Small 3-Pin SOT-23B Package No External Components
General Description
The TC1278/TC1279 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven active within 5µsec of VCC falling through the reset voltage threshold. RESET is maintained active for a minimum of 250msec after VCC rises above the reset threshold. The TC1278 has an active-high RESET output while the TC1279 has an active-low RESET output, and both devices have an open drain output stage. The output is valid down to VCC = 1.2V. Both devices are available in a 3-Pin SOT23B package.
Applications
Computers Embedded Systems Battery Powered Equipment Critical µP Power Supply Monitoring
Device Selection Table
Part Number Order Package Temp. Range
Typical Operating Circuit
VCC 2 VCC 1 RESET VCC Processor RESET Input
TC1278-xENB Open Drain 3-Pin SOT-23B -40°C to +85°C TC1279-xENB Open Drain 3-Pin SOT-23B -40°C to +85°C
NOTE: “x” denotes a suffix for VCC threshold (see table below).
TC1279
GND 3 GND
Suffix 5 10 15
Reset VCC Threshold (V) 4.625 4.375 4.125
Package Type
3-Pin SOT-23B
RESET 1 TC1278-xENB TC1279-xENB VCC
3
GND
2
NOTE: 3-Pin SOT-2...
Similar Datasheet