MTD3N25E

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MTD3N25E/D ™ Data Sheet TMOS E-FET.™ Power Field Effect Transistor DPAK for Surface Mount Designer's MTD3N25E Motorola Preferred Device N–Channel Enhancement–Mode Silicon Gate This advanced TMOS E–FET is designed to withstand high energy in the avalanche and commutation modes. The new energy efficient design also offers a drain–to–source diode with a fast recovery time. Designed for low voltage, high speed switching applications in power supplies, converters and PWM motor controls, these devices are particularly well suited for bridge circuits where diode speed and commutating safe operating areas are critical and offer additional safety margin against unexpected voltage transients. Avalanche Energy Specified Source–to–Drain Diode Recovery Time Comparable to a Discrete Fast Recovery Diode Diode is Characterized for Use in Bridge Circuits IDSS and VDS(on) Specified at Elevated Temperature Surface Mount Package Available in 16 mm, 13–inch/2500 Unit Tape & Reel, Add T4 Suffix to Part Number MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Rating Drain–Source Voltage Drain–Gate Voltage (RGS = 1.0 MΩ) Gate–Source Voltage — Continuous Gate–Source Voltage — Non–Repetitive (tp ≤ 10 ms) Drain Current — Continuous Drain Current — Continuous @ 100°C Drain Current — Single Pulse (tp ≤ 10 µs) Total Power Dissipation Derate above 25°C Total Power Dissipation @ TA = 25°C, when mounted to minimum recommended pad si...