DatasheetsPDF.com

ST16SF48 Dataheets PDF



Part Number ST16SF48
Manufacturers ST Microelectronics
Logo ST Microelectronics
Description Smartcard MCU With 8176 Bytes EEPROM
Datasheet ST16SF48 DatasheetST16SF48 Datasheet (PDF)

® ST16SF48 Smartcard MCU With 8176 Bytes EEPROM DATA BRIEFING s s 8 BIT ARCHITECTURE CPU 16 KBytes of USER ROM, SECTOR COMBINATIVE 1.5 KByte of SYSTEM ROM 384 Bytes of RAM 8176 Bytes of EEPROM, SECTOR COMBINATIVE – Highly reliable CMOS EEPROM technology – 10 year data retention – 300,000 Erase/Write cycle endurance – Protected One Time Programmable block (32 or 64 bytes) – 1 to 32 bytes block either Erase or Write in single cycle programming Micromodule (D4) 2 2 2 2 s s s s EXTENDED VOLTAG.

  ST16SF48   ST16SF48


Document
® ST16SF48 Smartcard MCU With 8176 Bytes EEPROM DATA BRIEFING s s 8 BIT ARCHITECTURE CPU 16 KBytes of USER ROM, SECTOR COMBINATIVE 1.5 KByte of SYSTEM ROM 384 Bytes of RAM 8176 Bytes of EEPROM, SECTOR COMBINATIVE – Highly reliable CMOS EEPROM technology – 10 year data retention – 300,000 Erase/Write cycle endurance – Protected One Time Programmable block (32 or 64 bytes) – 1 to 32 bytes block either Erase or Write in single cycle programming Micromodule (D4) 2 2 2 2 s s s s EXTENDED VOLTAGE OPERATION – VCC Range: 2.7V to 5.5V SERIAL ACCESS, ISO 7816-3 COMPATIBLE POWER SAVING STANDBY MODE UP TO 5 MHz INTERNAL OPERATING FREQUENCY VERY HIGH SECURITY FEATURES INCLUDING EEPROM FLASH ERASE CONTACT ASSIGNMENT COMPATIBLE ISO 7816-2 ESD PROTECTION GREATER THAN 5000V MEETS GSM 11.11 AND 11.12 SPECIFICATIONS 2 OPERATING CONFIGURATIONS – ISSUER – USER s s s Wafer s s s s s BD.SF48/9809V5 This is Brief Data from STMicroelectronics. Details are subject to change without notice. For complete data, please contact your nearest Sales Office or SmartCard Products Divison, Rousset, France. Fax: (+33) 4 42 25 87 29 1/2 ST16SF48 DESCRIPTION The ST16SF48, a member of the standard ST16 device family, is a serial access microcontroller especially designed for high volume and cost competitive Smartcard applications where firmware security algorithm must be implemented. The ST16SF48 is based on 8 bit CPU core and includes on chip memories: 384 Bytes of RAM, 16 KBytes of USER ROM, 1.5 KByte of SYSTEM ROM, and 8176 Bytes of EEPROM. Both ROM and EEPROM memories can be configured into two sectors. Access rules from any memory section or sector to any other are set-up by the User’s defined Memory Access Control Matrix (MACM). Reliability data related to the ST16SF48 product manufactured using STMicroelectronics advanced CMOS EEPROM technology confirm data retention up to 10 years and endurance up to 300,000 Erase/Write cycles. As all other ST16 family members, the ST16SF48 is fully compatible with the ISO standards for Smartcard applications. Software development (ROM code, options) can be completed by the ST16-19HDS development system. The ST16SF48 can be delivered either in unsawn or sawn wafers, 180 or 275 micron thickness as well as in micromodule package. Figure 1. Block Diagram V GENERATION PP RAM 8 BIT 384 SYSTEM ROM 1.5 KBtyte ROM 1615 KBytes CPU BYTES SECTORS COMBIN. SECT. S SECT. A SECT. B EEPROM 8176 Bytes SECTORS COMBINATIVE SECTOR A SECTOR B MEMORY ACCESS CONTROL MATRIX CLK INTERNAL BUS RST SERIAL I/0's INTERFACE NUMBER GENERATOR SECURITY LOGIC V CC I/O1 I/O2 GND SCP 102b/DS 2/2 .


ST16SF4F ST16SF48 ST16SF44


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)