VF594

ECM Surface Mount VCXO Valpey Fisher VF594 § § § § § § Wide Frequency Range Very Low Phase Jitter Wide Pullability Standard Footprint Wide Operating Temperature EMI Shielded Parameter Frequency Range Frequency Stability Supply Voltage Supply Current Load Duty Cycle Rise & Fall Times Logic “1” Level Logic “0” Level Start Up Time Phase Jitter Modulation BW Input Impedance Control Voltage Pulling Range Linearity Setability (Vc for center frequency) Operating Temp VF594 1.54MHz to 160.0MHz +/-25ppm Notes Vs. Temp 5V +/-5% Standard 3.3V +/-5% Option 12mA @ 20MHz No Load 10TTL gates or 50pF MAX, AC Coupled 50R Termination recommended @F >54MHz 40 / 60 or 45/55 Specify 6nS max 0.9Vcc min Max Load 0.1Vcc max Max Load 10mS max 2mS Typ 1pS max Fj>1kHz 10kHz @ -3dB min 50K ohm min Fm<10kHz 0V to 5.0V Vcc 5.0V 0V to 3.3V Vcc 3.3V +/- 50ppm Or Specify +/-5%, +/- 10% +/-20% Specify 2.50V typ Vcc 5.0V 1.65V typ Vcc 3.3V 0 0 0 C to +70 C Standard 0 0 -45 C to +85 C Available Option Environmental & Mechanical Mechanical Mil STD 202 Method 213 Cond E Shock Thermal Mil STD 883 Method 1011 Shock Cond A Vibration MIL-STD-883 Method 2007 Cond A 0 Soldering 260 C for 10s max: 0 Condition 230 C for 90s max -8 Hermetic Leak rate less than 5x10 Seal Atm.cc/s of helium Part Numbering VF594 S L 1 50 46.72M Series Stability S=20ppm Blank=50ppm Supply V L=3.3 Blank =5.0 Temp Range 1=-40+85 Blank= Std Pulling Range Frequency Pin Function A 13.97 B 9.78 C 4.70 1 Vc D 3.30 2 GND/ Case E 5.08 F 7.62...