Stereo 2.6W Audio Power Amplifier
APA2068
Stereo 2.6W Audio Power Amplifier (With DC_Volume Control)
Features
• Low Operating Current with 9mA • Improve...
Description
APA2068
Stereo 2.6W Audio Power Amplifier (With DC_Volume Control)
Features
Low Operating Current with 9mA Improved Depop Circuitry to Eliminate Turn-on
and Turn-off Transients in Outputs
High PSRR 32 Steps Volume Adjustable by DC Voltage with
Hysteresis
2.6W per Channel Output Power into 4Ω Load at
5V, BTL Mode
Two Output Modes Allowable with BTL and SE
Modes Selected by SE/BTL pin
Low Current Consumption in Shutdown Mode
(1µA)
Short-Circuit Protection Thermal Shutdown Protection and Over-Current
Protection Circuitry
Maximum Output Swing Clamping Function The OUT+ Signal and the IN- Signal are Outphase SOP-16P Packages with Thermal Pad Package Lead Free and Green Devices Available
(RoHS Compliant)
General Description
APA2068 is a monolithic integrated circuit, which provides precise DC volume control, and a stereo bridged audio power amplifiers capable of producing 2.6W (1.8W) into 4Ω with less than 10% (1.0%) THD+N. The attenuator range of the volume control in APA2068 is from 20dB (DC_Vol=0V) to -80dB (DC_Vol=3.54V) with 32 steps. The advantage of internal gain setting can be less components and PCB area. Both of the depop circuitry and the thermal shutdown protection circuitry are integrated in APA2068, that reduce pops and clicks noise during power up or shutdown mode operation. It also improves the power off pop noise and protects the chip from being destroyed by over temperature and short current failure. To simplify the audio system design...
Similar Datasheet