MULTIPLEXED TWO-WIRE HALL-EFFECT SENSOR
3055 MULTIPLEXED TWO-WIRE HALL EFFECT SENSOR IC
DISCONTINUED PRODUCT Shown for Reference Only
3055
MULTIPLEXED TWO-WIRE...
Description
3055 MULTIPLEXED TWO-WIRE HALL EFFECT SENSOR IC
DISCONTINUED PRODUCT Shown for Reference Only
3055
MULTIPLEXED TWO-WIRE HALL-EFFECT SENSOR ICs
The UGN3055U Hall-effect sensor is a digital magnetic sensing IC capable of communicating over a two-wire power/signal bus. Using a sequential addressing scheme, the device responds to a signal on the bus and returns the diagnostic status of the IC, as well as the status of each monitored external magnetic field. As many as 30 sensors can function on the same two-wire bus. This IC is ideal for multiple sensor applications where minimizing the wiring harness size is desirable or essential. The device consists of high-resolution bipolar Hall-effect switching circuitry, the output of which drives high-density CMOS logic stages. These logic stages decode the address pulse and enable a response at the appropriate address. The combination of magnetic-field or switch-status sensing, low-noise amplification of the Hall-transducer output, and high-density decoding and control logic is made possible by the development of a new sensor BiMOS fabrication technology. This unique magnetic sensing IC operates within specifications between -20°C and +85°C. Alternate magnetic and temperature specifications are available upon request. It is supplied in a 60 mil (1.54 mm) thick, three-pin plastic SIP. Each package is clearly marked with a two-digit decimal device address (xx).
Data Sheet 27680
LOGIC
1
2
GROUND
BUS
Dwg. PH-005
SWITCH IN
Pinning i...
Similar Datasheet