3.3V Octal D-type flip-flop
INTEGRATED CIRCUITS
74LVT574 3.3V Octal D-type flip-flop (3-State)
Product specification Supersedes data of 1995 Nov 14...
Description
INTEGRATED CIRCUITS
74LVT574 3.3V Octal D-type flip-flop (3-State)
Product specification Supersedes data of 1995 Nov 14 IC23 Data Handbook 1998 Feb 19
Philips Semiconductors
Philips Semiconductors
Product specification
3.3V Octal D-type flip-flop (3-State)
74LVT574
FEATURES
Inputs and outputs on opposite side of package allow easy 3-State outputs for bus interfacing Common output enable TTL input and output switching levels Input and output interface capability to systems at 5V supply Bus-hold data inputs eliminate the need for external pull-up Live insertion/extraction permitted No bus current loading when output is tied to 5V bus Power-up 3-State Power-up reset Latch-up protection exceeds 500mA per JEDEC Std 17 ESD protection exceeds 2000V per MIL STD 883 Method 3015
and 200V per Machine Model resistors to hold unused inputs interface to microprocessors
DESCRIPTION
The LVT574 is a high-performance BiCMOS product designed for VCC operation at 3.3V. This device is an 8-bit, edge triggered register coupled to eight 3-State output buffers. The two sections of the device are controlled independently by the clock (CP) and Output Enable (OE) control gates. The state of each D input (one set-up time before the Low-to-High clock transition) is transferred to the corresponding flip-flop’s Q output. The 3-State output buffers are designed to drive heavily loaded 3-State buses, MOS memories, or MOS microprocessors. The active-Low Output Enable (OE) cont...
Similar Datasheet