T85C5121

Features 80C51 Core – 12 or 6 Clocks per Instruction (X1 and X2 Modes) – 256 Bytes Scratchpad RAM – Dual Data Pointer – Two 16-bit Timer/Counters: T0 and T1 T83C5121 with 16 Kbytes Mask ROM T85C5121 with 16 Kbytes Code RAM T89C5121 with 16 Kbytes Code RAM and 16 Kbytes EEPROM On-chip Expanded RAM (XRAM): 256 Bytes Versatile Host Serial Interface – Full-duplex Enhanced UART (EUART) with Dedicated Baud Rate Generator (BRG): Most Standard Speeds up to 230K bits/s at 7.36 MHz – Output Enable Input – Multiple Logic Level Shifters Options (1.8V to V CC) – Automatic Level Shifter Option Multi-protocol Smart Card Interface – Certified with Dedicated Firmware According to ISO 7816, EMV2000, GIE-CB, GSM 11.12V and WHQL Standards – Asynchronous Protocols T = 0 and T = 1 with Direct and Inverse Modes – Baud Rate Generator Supporting All ISO7816 Speeds up to D = 32/F = 372 – Parity Error Detection and Indication – Automatic Character Repetition on Parity Errors – Programmable Timeout Detection – Card Clock Stop High or Low for Card Power-down Mode – Support Synchronous Card with C4 and C8 Programmable Outputs – Card Detection and Automatic De-activation Sequence – Step-up/down Converter with Programmable Voltage Output: 5V, 3V (± 8% at 60 mA) and 1.8V (±8% at 20 mA) – Direct Connection to Smart Card Terminals: www.DataSheet4U.com Short Circuit Current Limitation Logic Level Shifters 4 kV ESD Protection (MIL/STD 833 Class 3) Alternate Card Support with CLK, I/O and RST According to GSM 1...