Transceivers
Transmitting Block Diagram
LED Input 4
OPTO-3001A Transceiver OPTO-3001 Transceiver
Digital Data Links (...
Transceivers
Transmitting Block Diagram
LED Input 4
OPTO-3001A Transceiver OPTO-3001 Transceiver
Digital Data Links (660 & 800 nm)
OPTO-3001A and OPTO-3001 transceivers allow transmit and receive operation of TTL data for transmission speeds up to 6 Mb/s on plastic fiber and glass fiber, respectively.
PIN-PD
VCC IF-CONT
3 2
GND
1
Receiving Block Diagram
GND GND VCC GND Output 8 GND AMP Circuit
Specifications
Data : Data Rate: Wavelength: TTL Interface DC to 6 Mb/s 660 nm & 800 nm
7 Comparator 6 5 + – ATC Circuit
Reference Voltage Circuit
No. of Fibers: 2 Mounting Style:
PC Board 0.88" W x 0.62" L x 0.34" H 22 mm x 15.5 mm x 8.5 mm
Unit: mm
Size:
22 ± 0.3 10.16 3.5 8.5 ± 0.3
Operating Temperature: - 20° C to +70° C Connectors:
0.25 ± 0.1 5.8 4.2
Duplex
0.5 ± 0.1
2.54 20
0.6 ± 0.1
Power Budget/Distance Fiber Size
15.5 ± 0.3
Power Budget
Distance
Plastic 980/1000/µm Glass 200/230µm
16 dB 9 dB
80 m 1.5 km
9
10
8 7 6 5 4 3 2 1
1. Output 2. 3. 4. 5. GND 1 VCC GND 2 GND 3
6. LED Current Limiting Resistor 7. VCC 8. Input 9. Case 10.Case
Ordering Information
Part Number OPTO-3001A OPTO-3001 Description Transceiver, 660 nm Transceiver, 800 nm
6/6/00
Purdy Electronics Corporation 720 Palomar Avenue Sunnyvale, CA 94086 Tel: 408.523.8200 Fax: 408.733.1287
[email protected] www.purdyelectronics.com
1
...
