Document
0LFURFRPSXWHU &RPSRQHQWV
%LW &026 6LQJOH&KLS 0LFURFRQWUROOHU
&/
Data Sheet 1998-08 Preliminary
/ e .d s en r/ m to e i .s duc w w on w / / mic : tp ht se
C163-L Revision History: Previous Releases: Page --2 3 24 26, 27 36 39, 47 55 61 Subjects
1998-08 Preliminary 12.95 Advance Information
3 V specification introduced. Ordering codes removed. Pin description corrected (pin 16, 17, 21, 40). SSCBR removed. Revised description of Absolute Maximum Ratings and Operating Conditions. PLL description reworked. t22 updated. t35, t36, t59 updated. t200, t203, t204, t209 updated.
Edition 1998-08 Published by Siemens AG, Bereich Halbleiter, Marketing-Kommunikation Balanstraße 73, D-81541 München © Siemens AG 1998. All Rights Reserved. Attention please! As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or the Siemens Companies and Representatives worldwide. Due to technical requirements components may contain dangerous substances. For information on the type in question please contact your nearest Siemens Office, Semiconductor Group. Siemens AG is an approved CECC manufacturer. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components1 of the Semiconductor Group of Siemens AG, may only be used in life-support devices or systems2 with the express written approval of the Semiconductor Group of Siemens AG. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
C166-Family of High-Performance CMOS 16-Bit Microcontrollers Preliminary C163-L 16-Bit Microcontroller
q High Performance 16-bit CPU with 4-Stage Pipeline
C163-L
– – – – – – – –
q q q q
–
q
– –
q
– – – –
q q q q q q
q
80 ns Instruction Cycle Time at 25 MHz CPU Clock 400 ns Multiplication (16 × 16 bit), 800 ns Division (32 / 16 bit) Enhanced Boolean Bit Manipulation Facilities Additional Instructions to Support HLL and Operating Systems Register-Based Design with Multiple Variable Register Banks Single-Cycle Context Switching Support 16 MBytes Total Linear Address Space for Code and Data 1024 Bytes On-Chip Special Function Register Area 16-Priority-Level Interrupt System with 20 Sources, Sample-Rate down to 40 ns 8-Channel Interrupt-Driven Single-Cycle Data Transfer Facilities via Peripheral Event Controller (PEC) Clock Generation via on-chip PLL (1:1.5/2/2.5/3/4/5), via prescaler or via direct clock input On-Chip Memory Modules 1 KBytes On-Chip Internal RAM (IRAM) On-Chip Peripheral Modules Two Multi-Functional General Purpose Timer Units with 5 Timers Two Serial Channels (Synchronous/Asynchronous and High-Speed-Synchronous) Up to 16 MBytes External Address Space for Code and Data Programmable External Bus Characteristics for Different Address Ranges Multiplexed or Demultiplexed External Address/Data Buses with 8-Bit or 16-Bit Data Bus Width Five Programmable Chip-Select Signals Hold- and Hold-Acknowledge Bus Arbitration Support Idle and Power Down Modes Programmable Watchdog Timer and Oscillator Watchdog Up to 77 General Purpose I/O Lines High Speed Operation with 5 V Supply up to 25 MHz Low Power Operation with 3 V Supply up to 12 MHz Supported by a Large Range of Development Tools like C-Compilers, Macro-Assembler Packages, Emulators, Evaluation Boards, HLL-Debuggers, Simulators, Logic Analyzer Disassemblers, Programming Boards 100-Pin TQFP Package (Thin QFP)
This document describes the SAB-C163-LF, the SAB-C163-L25F and the SAF-C163-L25F. For simplicity all versions are referred to by the term C163-L throughout this document. 1 1998-08
11Aug98@14:48h Intermediate Version
C163-L
Introduction The C163-L is a derivative of the Siemens C166 family of 16-bit single-chip CMOS microcontrollers. It combines high CPU performance (up to 12.5 million instructions per second) with high periphera.