(EPMxxxx) JTAG & In-System Programmability
Section I. MAX II Device Family Data Sheet
This section provides designers with the data sheet specifications for MAX® ...
Description
Section I. MAX II Device Family Data Sheet
This section provides designers with the data sheet specifications for MAX® II devices. The chapters contain feature definitions of the internal architecture, Joint Test Action Group (JTAG) and in-system programmability (ISP) information, DC operating conditions, AC timing parameters, and ordering information for MAX II devices. This section includes the following chapters:
■ ■ ■ ■ ■ ■
Chapter 1. Introduction Chapter 2. MAX II Architecture Chapter 3. JTAG & In-System Programmability Chapter 4. Hot Socketing & Power-On Reset in MAX II Devices Chapter 5. DC & Switching Characteristics Chapter 6. Reference & Ordering Information
Altera Corporation
Section I–1 Preliminary
Revision History
MAX II Device Handbook
Revision History
The table below shows the revision history for Chapters 1 through 6. Chapter(s)
1
Date/Version
Changes Made
December 2004, v1.2 Updated timing numbers in Table 1. June 2004, v1.1 Updated timing numbers in Table 1.
2
December 2004, v1.2 Added a paragraph to page 2-15. June 2004, v1.1 Added CFM acronym. Corrected Figure 2-19.
3
December 2004, v1.2 Updated text on pages 3-5 to 3-8. June 2004, v1.1 Corrected Figure 3-1. Added CFM acronym.
4
December 2004, v1.2 Added content to Power-Up Characteristics section. Updated Figure 4-5. June 2004, v1.1 Corrected Figure 4-2.
5
December 2004, v1.2 Updated timing tables 5-2, 5-4, 5-12, and tables 15-14 through 5-34. Table 5-31 is new. June 2004, v1.1 Updated ...
Similar Datasheet