SD560S

DATA SHEET SD520S~SD5100S SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS VOLTAGE 20 to 100 Volts FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Low profile package .225(5.7) .209(5.3) CURRENT - 5 Ampere TO-252 / DPAK .264(6.7) .248(6.3) .216(5.5) .200(5.1) 4 Unit: inch ( mm ) .098(2.5) .082(2.1) .024(0.6) .016(0.4) Low power loss, High efficiency High surge capacity For use in low voltage high frequency inverters, free wheeling, and polarity protection applications High temperature soldering guaranteed:260¢XC/10 seconds at terminals 1 2 3 .106(2.7) .090(2.3) MECHANICAL DATA Case: D PAK/TO-252 molded plastic Terminals: Solder plated, solderable per MIL-STD-750,Method 2026 Polarity: As marking Standard packaging: 16mm tape (EIA-481) Weight: 0.015 ounces, 0.4grams. .09 .09 (2.3) (2.3) .032(0.8) .012(0.3) 3 2 4 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% .040(1.0) MIN. Built-in strain relief .063(1.6) .047(1.2) .02(.5) .071(1.8) .051(1.3) SD520S Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Tc=75°C Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Volt...