LT1009 Series 2.5V Reference
FEATURES
s s s s s
DESCRIPTIO
s
Maximum Initial Tolerance: 0.2% Guaranteed Temperature ...
LT1009 Series 2.5V Reference
FEATURES
s s s s s
DESCRIPTIO
s
Maximum Initial Tolerance: 0.2% Guaranteed Temperature Stability Maximum 0.6Ω Dynamic Impedance Wide Operating Current Range Directly Interchangeable with LM136 for Improved Performance No Adjustments Needed for Minimum Temperature Coefficient
The LT®1009 is a precision trimmed 2.5V shunt
regulator diode featuring a maximum initial tolerance of only ± 5mV. The low dynamic impedance and wide operating current range enhances its versatility. The 0.2% reference tolerance is achieved by on-chip trimming which not only minimizes the initial voltage tolerance but also minimizes the temperature drift. Even though no adjustments are needed with the LT1009, a third terminal allows the reference voltage to be adjusted ± 5% to calibrate out system errors. In many applications, the LT1009 can be used as a pin-to-pin replacement of the LM136 and the external trim network eliminated. For a lower drift 2.5V reference, see the LT1019 data sheet.
, LTC and LT are registered trademarks of Linear Technology Corporation.
U APPLICATIO S
s s s s s
Reference for 5V Systems 8-Bit A/D and D/A Reference Digital Voltmeters Current Loop Measurement and Control Systems Power Supply Monitor
TYPICAL APPLICATION
2.5V Reference
2.53
5V TO 35V
2.52
REFERENCE VOLTAGE (V)
3.6k OUTPUT LT1009 10k* TRIM
2.51 2.50 2.49 2.48
*DOES NOT AFFECT TEMPERATURE COEFFICIENT. ± 5% TRIM RANGE
1009 TA01
2.47 –50 –25
U
Output Voltage
GUARANTEED MAXIMUM T...