SM1145B

SM1100B SERIES n n n n CMOS COMPATIBLE WITH TRI−STATE OUTPUT LEADLESS SURFACE MOUNT PACKAGE WITH GROUNDED PC BOARD BASE AND METAL COVER FOR LOW EMI IDEAL FOR CUSTOM-DESIGNED CLOCK OSCILLATORS OF NON-STANDARD FREQUENCIES AND UNUSUAL SPECIFICATIONS LAND PATTERN COMPATIBLE TO OUR ENTIRE SM1100X SERIES AND EPSON SG615 STANDARD SPECIFICATIONS: Frequency Range Frequency Stability over Operating Temperature Range Operating Temperature Range Operable Supply Voltage (Vcc) Symmetry (Duty Cycle) (See next page for definition.) Input Current (Icc) & Rise and Fall Time (Tr & Tf) & Jitter Logic “1” & Logic “0” (See next page) Output Load Tri-state Output Packaging (see page R1, Figure 3) 650 kHz – 69.999 MHz (Consult factory for specific available frequencies) ± 50 PPM is standard, but ± 25 PPM is also available for certain frequencies. 0 - 70°C is standard, but can be extended to − 40 to +85°C for certain frequencies 5 Volt ± 10% is standard, but 3.3 Volt ± 10% also available 40/60 - 60/40% is standard, but 45/55% symmetry at 50% of Vcc is also available. Depends on frequency and output load. See next page. 90% of Vcc MIN.; 10% of Vcc MAX. Depends on the design. Normal output when pin #1 is open (no connection); Normal output when pin #1 is at logic “1”; High-Impedance Output when pin #1 is at logic “0”. 28 parts per tube or 24 mm tape, 330mm reel: 500 parts per reel PART NUMBERING GUIDE: n The Pletronics part number for an SM1100B series oscillator consists of the following 3 elements:...