CALL PROCRESS TONE DETECTOR
DATA BULLETIN
MX633
Features
• • • • • • • • Worldwide Tone Compatibility Single and Dual Tones Detected U.S. Busy-Dete...
Description
DATA BULLETIN
MX633
Features
Worldwide Tone Compatibility Single and Dual Tones Detected U.S. Busy-Detect Output Voice-Detect Output Wide Dynamic Range > 40dBm Low Supply Current (0.3mA/0.5mA) Low Supply Voltage (3.3V/5.0V) Standard 3.58MHz Xtal
Call Progress Tone Detector
PRELIMINARY INFORMATION
Applications
Automatic Calling Products
XTAL/ CLOCK XTAL / CLOCK OSCILLATOR XTAL
VDD VSS
ENABLE
DETECT1 SIGIN SLICER SIGNAL ANALYZER CONTROL LOGIC
DETECT2
The MX633 is a low cost, low power device that uses signal processing techniques to detect audible tone signals such as Dial, Ringing, Busy and other conditions found when placing a call throughout the world’s telecom systems. Detection of these call progress stages is essential to the proper operation of automatic calling products. The MX633 adds new features to Call Progress monitoring. It detects and indicates the ‘U.S. Busy’ tones, reducing the need to measure ‘tone cadence’ to identify ‘U.S. Busy’. It also detects and indicates voice and other signals from Call Progress tones, reducing voice-falsing and adding voice-answer as a connection prompt. The MX633 may be used with a 3.0V to a 5.5V supply and is available in the following package styles: 8-pin PDIP (MX633P) and 16-pin SOIC (MX633DW).
© 1997 MXCOM Inc.
4800 Bethania Station Road, Winston-Salem, NC 27105-1201 USA
www.mxcom.com Tele: 800 638-5577 910 744-5050
All trademarks and service marks are held by their respective companies.
Fax: 910...
Similar Datasheet