DF30FB-xxx

0.4 mm Pitch, 0.9 mm Height, Board-to-Board / Board-to-FPC Connectors DF30 Series Extremely small size Header (0.4 (0.90) (3 .56 ) .76 0) (4 ) (10. 22) Receptacle 40 positions shown sOverview Continuous miniaturization and increased component density on PCB created demand for extremely low profile connectors. This series is addition of a new extremely low profile connectors to Hirose's wide range of high reliability board-to-board/board-to-FPC connection solutions. s Low profile s Increased mated retention s High contact reliability sFeatures 1. Contact reliability Concentration of the contact's normal forces at the single point assures good contact wipe and electrical reliability, while confirming the fully mated condition with a definite tactile click. Header DF30*-*DP-0.4V 0.9mm Receptacle DF30*-*DS-0.4V Protrusion improves mated retention 2. Self alignment Recognizing the difficulties of mating extremely small connectors in limited spaces the connectors will self align in horizontal axis within 0.3 mm. 3. Automatic board placement Packaged on tape-and-reel the plug and headers have sufficiently large flat areas to allow pick-up with vacuum nozzles of automatic placement equipment. Self alignment 4. Variety of contact positions and styles w m o c test connector 5. Support for continuity . u 4 t e sApplications e h s a t a .d w w Available in standard contact positions of: 20, 22, 24, 30, 34, 40, 50, 60, 70 and 80 with and without metal fittings. Addition...