TET
_
Adapters
V1.1
QFP44 - TET
Target CPU package: QFP44 Body size: 10 mm x 10 mm Pitch: 0.8 mm POD target layout: T_QFP6...
Description
_
Adapters
V1.1
QFP44 - TET
Target CPU package: QFP44 Body size: 10 mm x 10 mm Pitch: 0.8 mm POD target layout: T_QFP64 Can be used with: ST72F561 POD Note that adapter solutions stated in the document can be used only with listed PODs. Disregarding this warning may result in hardware failure of the target and the emulation system.
h Available Adapter Parts (by ordering code):
IA44TQ-SOLDER
Solder part, which is being soldered to the target.
(Unit: mm) A B 12 1.325
C 13.0
D 13.0
E 2.0
K 14.65
L 14.65
Recommended (by TET) PCB footprint size
w
w
w
.
t a d
h s a
t e e
. u 4
m o c
© iSYSTEM, April 2005
1/8
www.DataSheet4U.com
IA44TQ-SOLDER dimensions
IA64P44ST7-TQ
The IA64P44ST7-TQ adapter consists of two parts. In this document, they are named IA44TQSOLDER and IA64P44ST7-FIXED to simplify the assembly instructions. Note that the IA64P44ST7FIXED is not the ordering code. However, IA44TQ-SOLDER part can be ordered as a spare part under its name.
IA44TQ-SOLDER
IA64P44ST7-FIXED
IA64P44TQ-W-ST
© iSYSTEM, April 2005
2/8
IA64P44TQ-W-ST The IA64P44TQ-W-ST represents flexible connection between the POD and the target.
© iSYSTEM, April 2005
3/8
Flexible Adapter
IA64P44TQ-W-ST and IA44TQ-SOLDER are essential parts required to adapt the POD to the target QFP44 package. First, IA44TQ -SOLDER is soldered to the target and then the POD is connected via IA64P44TQ-W-ST.
h Assembly
While assembling the adapter and connecting the POD to the target, pay...
Similar Datasheet