DL1200

DL 300 DL1200 FAST RECOVERY HIGH VOLTAGE 25mA MINIATURE SILICON RECTIFIERS SMALL SIZE MOLDED PACKAGE PRV 3,000 TO 12,000 VOLTS 1.0 INCH MIN. LEADS LOW LEAKAGE EDI Type DL300 DL500 DL800 DL1000 DL1200 PRV Volts 3,000 5,000 8,000 10,000 12,000 ELECTRICAL CHARACTERISTICS (at TA =25 o C Unless Otherwise Specified) Average Rectified Forward Current @ 50 C, IO Max. Peak Surge Current, IFSM (8.3ms) o 25 mA 3 Amp Max. Reverse Recovery Trr (Fig.4) Max. Forward Voltage Drop @25 mA, V F Max. DC Reverse Current @ PRV and 25 C, IR Max. DC Reverse Current @ PRV and 100 C, I R Ambient Operating Temperature Range, T A Storage Temperature Range, TSTG NOTES: o o 150nanosec 26Volts 1 25 o A A o w w w e e h s a over 10,000v/inch in length, devices should be immersed in oil or ree - ncapsulated. 2.Iftoperated a EDI reserves the right to change these specifications at any time without notice. d . . u t4 m o c -55 C to +125 C -55 C to +150 C o o 1.It is recommended that a proper heat sink be used on the terminals of this device between the body and soldering point to prevent damage from excess heat. www.DataSheet4U.com DL300 FIG.1 OUTPUT CURRENT vs AMBIENT TEMPERATURE 100 100 DL 1200 1.0SEC FIG.2 NON- REPETITIVE SURGE CURRENT 0.1SEC % RATED FWD CURRENT % MAXIMUM SURGE 75 75 50 50 25 25 0 0 25 50 75 100 O 0 125 150 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 AMBIENT TEMPERATURE C CYCLES(60 Hz) FIG.3 MECHANICAL LEAD-SOLDER DIPPED COPPER MARKING:CATHODE BAND AND DEVICE TYPE 1...