Quad 2-1 Data Selector/Multiplexer
TECHNICAL DATA
IN74HC257A
Quad 2-Input Data Selector/Multiplexer with 3-State Outputs
High-Performance Silicon-Gate CM...
Description
TECHNICAL DATA
IN74HC257A
Quad 2-Input Data Selector/Multiplexer with 3-State Outputs
High-Performance Silicon-Gate CMOS
The IN74HC257A is identical in pinout to the LS/ALS257. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. This device selects a (4-bit) nibble from either the A or B inputs as determined by the Select input. The nibble is presented at the outputs in noninverted from when the Output Enable pin is at a low level. A high level on the Output Enable pin switches the outputs into the highimpedance state. Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 2.0 to 6.0 V Low Input Current: 1.0 µA High Noise Immunity Characteristic of CMOS Devices
ORDERING INFORMATION IN74HC257AN Plastic IN74HC257AD SOIC TA = -55° to 125° C for all packages
PIN ASSIGNMENT LOGIC DIAGRAM
FUNCTION TABLE
Inputs Output Enable H L PIN 16 =VCC PIN 8 = GND Select X L H Outputs Y0-Y3 Z A0-A3 B0-B3
w
w
w
.d
e e h s a t a
. u t4
m o c
L
X=don’t care Z = high-impedance state A0-A3,B0-B3=the levels of the respective Nibble Inputs
1
www.DataSheet4U.com
IN74HC257A
MAXIMUM RATINGS*
Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL
*
Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Current, per Pin DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Plastic...
Similar Datasheet