Hex Buffer/Line Driver
TECHNICAL DATA
IN74HC367A
Hex 3-State Noninverting Buffer with Separate 2-Bit and 4-Bit Sections
High-Performance Sili...
Description
TECHNICAL DATA
IN74HC367A
Hex 3-State Noninverting Buffer with Separate 2-Bit and 4-Bit Sections
High-Performance Silicon-Gate CMOS
The IN74HC367A is identical in pinout to the LS/ALS367. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. This device is arranged into 2-Bit and 4-Bit sections, each having its own active-low Output Enable. When either of the enables is high, the affected buffer outputs are placed into high-impedance states. The IN74HC367A has noninverting outputs. Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 2.0 to 6.0 V Low Input Current: 1.0 µA High Noise Immunity Characteristic of CMOS Devices
ORDERING INFORMATION IN74HC367AN Plastic IN74HC367AD SOIC TA = -55° to 125° C for all packages
PIN ASSIGNMENT LOGIC DIAGRAM
FUNCTION TABLE
Inputs Enable 1,Enable 2 A L H X Output Y L H Z
w
w
w
.d
e e h s a t a
. u t4
m o c
L L H Z = high impedance X = don’t care
PIN 16 =VCC PIN 8 = GND
1
www.DataSheet4U.com
IN74HC367A
MAXIMUM RATINGS*
Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL
*
Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Current, per Pin DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Pack...
Similar Datasheet