Octal Bus Transceiver
TECHNICAL DATA
Octal 3-State Noninverting Bus Transceiver
High-Speed Silicon-Gate CMOS
The IN74AC245 is identical in pi...
Description
TECHNICAL DATA
Octal 3-State Noninverting Bus Transceiver
High-Speed Silicon-Gate CMOS
The IN74AC245 is identical in pinout to the LS/ALS245, HC/HCT245. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALS outputs. The IN74AC245 is a 3-state noninverting transceiver that is used for 2-way asynchronous communication between data buses. The device has an active-low Output Enable pin, which is used to place the I/O ports into high-impedance states. The Direction control determines whether data flows from A to B or from B to A. Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 2.0 to 6.0 V Low Input Current: 1.0 µA; 0.1 µA @ 25°C High Noise Immunity Characteristic of CMOS Devices Outputs Source/Sink 24 mA
IN74AC245
ORDERING INFORMATION IN74AC245N Plastic IN74AC245DW SOIC TA = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Control Inputs Output Enable L Direction L Operation Data Transmitted from Bus B to Bus A Data Transmitted from Bus A to Bus B Buses Isolated (High Impedance State)
w
w
w
.d
e e h s a t a
. u t4
m o c
PIN 20=VCC PIN 10 = GND
L
H
H
X
X = don’t care
1
www.DataSheet4U.com
IN74AC245
MAXIMUM RATINGS*
Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL
*
Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Sink/Source Curren...
Similar Datasheet