Quad 2-1 Data Selector/Multiplexer
TECHNICAL DATA
IN74AC258
Quad 2-Input Data Selector/Multiplexer with 3-State Outputs
High-Speed Silicon-Gate CMOS
The ...
Description
TECHNICAL DATA
IN74AC258
Quad 2-Input Data Selector/Multiplexer with 3-State Outputs
High-Speed Silicon-Gate CMOS
The IN74AC258 is identical in pinout to the LS/ALS258, HC/HCT258. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALS outputs. This device selects a (4-bit) nibble from either the A or B inputs as determined by the Select input. The nibble is presented at the outputs in inverted from when the Output Enable pin is at a low level. A high level on the Output Enable pin switches the outputs into the high-impedance state. Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 2.0 to 6.0 V Low Input Current: 1.0 µA; 0.1 µA @ 25°C High Noise Immunity Characteristic of CMOS Devices Outputs Source/Sink 24 mA
ORDERING INFORMATION IN74AC258N Plastic IN74AC258D SOIC TA = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Inputs Output Enable H Select X L H Outputs Y0-Y3 Z A0-A3 B0-B3
w
w
w
.d
e e h s a t a
. u t4
PIN 16 =VCC PIN 8 = GND
m o c
L L
X=don’t care Z = high-impedance state A0-A3,B0-B3=the levels of the respective Nibble Inputs
1
www.DataSheet4U.com
IN74AC258
MAXIMUM RATINGS*
Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL
*
Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Sink/Source Current, per Pin DC Supply Current, VCC a...
Similar Datasheet