ISO-CMOS 8 x 16 Analog Switch Array
ISO-CMOS
MT8816 8 x 16 Analog Switch Array
Data Sheet
Features
• • • • • • • • • • Internal control latches and addres...
Description
ISO-CMOS
MT8816 8 x 16 Analog Switch Array
Data Sheet
Features
Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5 V to 13.2 V 12Vpp analog signal capability RON 65 Ω max. @ VDD = 12 V, 25°C ∆RON ≤10 Ω @ VDD = 12 V, 25°C Full CMOS switch for low distortion Minimum feedthrough and crosstalk Separate analog and digital reference supplies Low power consumption ISO-CMOS technology
Ordering Information MT8816AE MT8816AP MT8816APR MT8816AP1 MT8816APR1 MT8816AE1 40 44 44 44 44 40 Pin Pin Pin Pin Pin Pin PDIP PLCC PLCC PLCC* PLCC* PDIP*
February 2005
Tubes Tubes Tape & Reel Tubes Tape & Reel Tubes
* Pb Free Matte Tin -40°C to +85 °C
Description
The Zarlink MT8816 is fabricated in Zarlink’s ISOCMOS technology providing low power dissipation and high reliability. The device contains a 8 x 16 array of crosspoint switches along with a 7 to 128 line decoder and latch circuits. Any one of the 128 switches can be addressed by selecting the appropriate seven address bits. The selected switch can be turned on or off by applying a logical one or zero to the DATA input. VSS is the ground reference of the digital inputs. The range of the analog signal is from VDD to VEE. Chip Select (CS) allows the crosspoint array to be cascaded for matrix expansion.
Applications
Key systems PBX systems Mobile radio Test equipment/instrumentation Analog/digital multiplexers Audio/Video switching
CS
STROBE
DATA RESET
VDD
...
Similar Datasheet