Triple Video Output Amplifier
ILA6107Q
Triple video output amplifier
GENERAL DESCRIPTION The ILA6107Q includes three video output amplifiers in one p...
Description
ILA6107Q
Triple video output amplifier
GENERAL DESCRIPTION The ILA6107Q includes three video output amplifiers in one plastic DIL-bent-SIL 9-pin medium power (DBS9MPF) package (SOT111-1), using high-voltage DMOS technology, and is intended to drive the three cathodes of a colour CRT directly. To obtain maximum performance, the amplifier should be used with blackcurrent control FEATURES Typical bandwidth of 5.5 MHz for an output signal of 60 V (p-p) High slew rate of 900 V/µs No external components required Very simple application Single supply voltage of 200 V Internal reference voltage of 2.5 V Fixed gain of 50 Black-Current Stabilization (BCS) circuit Thermal protection.
PINNING
SIMBO Vi(1) Vi(2) Vi(3) GND Iom VDD Voc(3) Voc(2) Voc(1)
PIN 1 2 3 4 5 6 7 8 9
DESCRIPTION
w
inverting input 1 inverting input 2 inverting input 3 ground (fin) black-current measurement output supply voltage cathode output 3 cathode output 2 cathode output 1
w
.D w
t a
S a
e h
t e
Vi(1) Vi(2) Vi(3) GND Iom VDD VOC(3) VOC(2) VOC(1)
U 4
.c
m o
ILA6107Q
MGK277
Fig. 2 Pin configuration.
www.DataSheet4U.com
ILA6107Q
.
ORDERING INFORMATION
BLOCK DIAGRAM
ILA6107Q
ILA6107Q
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134); voltage measured with respect to pin 4 (ground); currents as specified in Fig. 1; unless otherwise specified. SYMBOL VDD Vi Vo(m) Vo(c) Tstg Tj Ves PARAMETER supply voltage supply voltage at pins 1 to 3 measurement o...
Similar Datasheet