TWO MODULUS PRESCALER WITH STAND-BY MODE
Sept. 1995 Edition 3.0a
DATA SHEET
MB509
TWO MODULUS PRESCALER WITH STAND-BY MODE
TWO MODULUS PRESCALER WITH STAND-BY ...
Description
Sept. 1995 Edition 3.0a
DATA SHEET
MB509
TWO MODULUS PRESCALER WITH STAND-BY MODE
TWO MODULUS PRESCALER WITH STAND-BY MODE
The Fujitsu MB509 is a low power, two modulus prescaler equipped with the standby mode. The MB509 is used in conjunction with a frequency synthesizer to form a Phase Locked Loop (PLL) and will divide the input frequency by the modulus of 65/65 or 128/129. Power consumption is typically 11.5mA at 5.0V. under normal operation, with the current reduced to180µA in standby mode. By using MB509 with the MB87076, intermittent operating mode can be achieved.
FEATURES
S S S S S S S S
PLASTIC PACKAGE DIP-08P-M01
fmax = 1.1GHz max. (PIN = –4dBm min.) 64/65, 128/129 58mW typ. 180µA typ. VO = 1.6Vp–p typ.
High Frequency Operation: Pulse Swallow Function: Power Supply Consumption: Stand-by Current: Stable Output Amplitude:
PLASTIC PACKAGE FPT-08P-M01
Complete PLL synthesizer circuit with the Fujitsu MB87076, PLL frequency synthesizer IC Plastic 8-pin Dual-In-Line Package (Suffix: –P) Plastic 8-pin Mini Flat Package (Suffix: –PF) Built-in a Termination Resistor Stable output amplitude is obtained up to output load capacitance of 8pF
IN 1 2 TOP VIEW 3 4 8 7 6 5 IN PS MC GND
PIN ASSIGNMENT
ABSOLUTE MAXIMUM RATINGS (See Note)
Rating Power Supply Voltage Input Voltage Output Current Storage Temperature
Note:
Symbol VCC VIN IO TSTG
Value –0.5 to +7.0 –0.5 to VCC 10 –55 to +125
Unit V V mA °C
VCC SW OUT
Permanent device damage may occur if the above Absolute Ma...
Similar Datasheet