MOC119

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MOC119/D GlobalOptoisolator™ 6-Pin DIP Optoisolator Darlington Output (No Base Connection) The MOC119 device consists of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon photodarlington detector. The chip to Pin 6 connection has been eliminated for better performance when used in high noise environments. It is designed for use in applications requiring high improved noise immunity. Provides Higher Output Collector Current (IC) with Lower Values of Input Drive Current (IF) To order devices that are tested and marked per VDE 0884 requirements, the suffix ”V” must be included at end of part number. VDE 0884 is a test option. Applications Appliance, Measuring Instruments Interfacing and coupling systems of different potentials and impedances Monitor and Detection Circuits I/O Interfaces for Computers Solid State Relays Portable Electronics Programmable Controllers MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Rating INPUT LED Reverse Voltage Forward Current — Continuous LED Power Dissipation @ TA = 25°C with Negligible Power in Output Detector Derate above 25°C OUTPUT DETECTOR Collector–Emitter Voltage Emitter–Collector Voltage Detector Power Dissipation @ TA = 25°C with Negligible Power in Input LED Derate above 25°C TOTAL DEVICE Isolation Surge Voltage(1) (Peak ac Voltage, 60 Hz, 1 sec Duration) Total Device Power Dissipation @ TA = 25°C Derate above 25°C ...