MN86063

For Communications Equipment MN86063 High-Speed CODEC LSI for Facsimile Images Overview The MN86063 is a high-speed LSI codec for compressing and decompressing facsimile images. Features include real-time printing to laser printers, built-in line memory, enlargement and reduction, and code conversion. Function Message coding: MH, MR, MMR, and MG3. The chip also supports data transfers on the image and system buses and DMA transfers on the image bus alone. Coding conversion The chip converts between all supported message coding systems: MH, MR, MMR, and MG3. Enlargement/reduction These may be added to coding, decoding, code conversion, and data transfer operations. (1) In the primary scan direction, the chip uses multiplication on the change point address. The scaling factor can be anywhere between approximately 0.1% and 200% in increments of approximately 0.1%. Integral multiplication is also available beyond this (2) In the subscanning direction, the chip uses decimation and replication. The scaling factor can be anywhere between approximately 0.0015% and 200% in increments of approximately 0.0015%. Integral multiplication is also available from 2 to 65,535. White masks for both edges These may be added to coding, decoding, code conversion, and data transfer operations. They change all pixels within the margins, specified in bit increments, to white. Decoding error processing The chip offers a choice of replacing with the previous line or a white line. Features Pixels per...