OM02 Cameras Datasheet

OM02 Datasheet, PDF, Equivalent


Part Number

OM02

Description

Special CCD Cameras

Manufacture

Sinartis

Total Page 2 Pages
Datasheet
Download OM02 Datasheet


OM02
omOM02 HIRES
.cSpecial CCD Cameras
www.DataSheet4Ufor PCB Inspection
Image Processing Technologies
TECHNICAL SPECIFICATIONS
CCD Camera
Sensor:
CCD 1/3”
Standard video: CCIR B/W
Number of pixel: 795 Hor. x 596 Ver.
Scanning System: 625 lines 50 fields/sec
Video out:
1 Volt p-p / 75 Ohm
Shutter:
1/50—1/120.000 automatic
S/N:
52 –60 dB (AGC off)
Iris:
automatic esp.
.comOM02 HIRES CCD camera
In an anodized aluminum block which is vibration
Uresistant and dust protected are mounted a CCD
t4camera, a telecentric objective, a near infrared
illuminator and an optical filter which has a
transmission peak at the illuminator wavelength.
eThe illuminator radiation passes through the filter
but the camera receives only the backscattered
elight from the object of the same wavelength. So,
hthe visible environmental light is cut-off.
The connections for power in and signal out are
made with connectors fixed by screws.
SThe CCD cameras OM02 are designed for the
tainspection and the alignment with high precision
of PCBs (Printed Circuit Boards) during their
manufacturing process (layers stacking, pressing,
acutting, drilling, etc.).
The use of a telecentric optics is very important to
.Dreduce perspective errors and to obtain constant
magnification in spite of the fact that the PCB
changes its distance from the optics, due to the
wchange of thickness of multi-layers.
The CCD cameras OM02 are manufactured with
wthree working areas: Standard 8 x 10.6 (4x 5.3
with zoom 2X active) mm Laser 3.6 x 4.8 (1.8 x
w2.4) mm e BGA 2.3 x 3 (1.1 x 1.5 ) mm.
AGC:
ON /OFF
Optics
Objective:
fixed focus telecentric
Working area :
8 x 10.6 ( 4x5.3 Zoom) mm Standard
3.6 x 4.8 (1.8x2.4 Zoom) mm Laser
2.2 x 2.9 (1.1x1.4 Zoom) mm BGA
Working distance: 41 mm (± 12) Standard
31.5 mm (± 2.5) Laser
43.5 mm (± 1.5) BGA
Material
Black anodized aluminum
Illuminator IR LED
Wavelength:
880 nm
Number of LEDs: 18 in a ring dia. 21 mm
Illum. angle:
20°
Lum. intensity: >20 mW/sr / LED
Dimensions (mm, included connectors)
Standard :
Laser :
BGA :
Power in
128 x 54 x 48
140 x 54 x 48
140 x 54 x 48
+12 Volt – 250 mA
Connectors
DIN SKV 5p M
for power in CCD and LED
for zoom, AGC and mirror on/off signal input
TNC for video out
Being the working areas so small it is possible to
mdetect images with high resolution and to
taSheet4U.coprocess them for micrometric measurements.
Connectors
How to order:
8S0965/S : OM02 Hires Standard
8S0965/L : OM02 Hires Laser
8S0965/B : OM02 Hires BGA
8S0765 : Coax. Cable 5 m BNC-BNC
8S0966 : Power Cable 5 m DIN 5P F -DSUB 9
.DaSinartis S.r.l. via A. Moro 10/b 21012 Cassano Magnago (Va) Italy
wtel. +39-0331-282257 fax +39-0331-202950
wwww.sinartis.it e-mail sinartis@sinartis.it
wTechnical Data Sheet OM02H JAN 2003

OM02
OM02 HIRES
Special CCD Cameras
for PCB Inspection
APPLICATION NOTE
Special CCD cameras OM02 for PCBs inspection
can be used in a kit which includes electronic
boards with image capture and processing
software manufactured by Sinartis.
Depending on the application, it is possible to
choose between a stand-alone solution or a PC-
based one. In both cases, software is available to
find the PCB reference pad and to calculate its
geometrical center with very high (sub-pixeling )
precision and repeatability of (≈±1 µm).
STAND ALONE processing
(no PC required)
In this configuration the OM02 camera is delivered
in a kit with the DSP (Digital Signal Processor)
board Sindsp-5409 or with the Video Processor
apparatus Sinpatt.
A proprietary software to process the PCB pads
is pre-loaded on a Flash EPROM memory and it
executed by the DSP processor.
The data communication with a control unit (CNC,
PLC etc.) is made by RS-232 or RS-485 standard
serial interfaces following a specified protocol
which is delivered to the customer.
It is possible to have as input up to four CCDs
cameras in multiplexing mode. As outputs, in
addition to the standard serial interfaces, there is
a monitor output with overlay graphics.
Image Processing Technologies
PC BASED processing
In this configuration the OM02 camera is delivered in
a kit with the frame grabber Sincapt-II for video
capture and image transfer in real time to a host PC
memory by standard PCI interface (Peripheral
Component Interface).
Sincapt-II has driver compatibility for Windows
95/98, Windows XP, Windows 2000, LINUX and it is
software supported for C/C++ languages and
compilers.
On request, SW libraries SinIMAGE.lib are
available for advanced image processing algorithms
which are optimized for the measurement of PCB
pads.
KIT OM02 with Sincapt-II frame grabber
PC based image acquisition
KIT OM02 with Sindsp-5409 DSP board
Sinpatt Video Processor
HOW TO ORDER
8S0918/S/L/B:Kit OM02H+Sindsp5409+FW
8S0919/S/L/B:Kit OM02H+ SincaptII+Drivers+OM02
+ SW SinSample (C++ source code)
8S0920/S/L/B:Kit OM02H + Sinpatt V.P.+ FW
8S0887: Cable 3 m DIN 5P F e TNC– DSUB15M Sincapt
8S0890: Cable 3 m DIN 5P F e TNC– DSUB15M Sindsp
8S0507: Cable coax. video 5 m BNC-TNC
8S0825: Cable coax. video 5 m BNC-BNC for monitor
8S0892: Cable coax. video 5 m TNC-RCA for Sincapt
8S0853: External power supply for Sinpatt
110711: SinImage.lib SW library for advanced image
processing (C/C++, Visual C/C++)
Sinartis S.r.l. via A. Moro 10/b 21012 Cassano Magnago (Va) Italy
tel. +39-331-282257 fax +39-331-202950
www.sinartis.it e-mail sinartis@sinartis.it
Technical Data Sheet OM02HZ JAN 2003


Features OM02 HIRES Special CCD Cameras for PCB I nspection w w w .D a ta Sh t e e 4U . m o c Image Processing Techn ologies TECHNICAL SPECIFICATIONS CCD C amera • Sensor: • Standard video: Number of pixel: • Scanning System : • Video out: • Shutter: • S/N: • Iris: • AGC: CCD 1/3” CCIR B/W 795 Hor. x 596 Ver. 625 lines 50 fields /sec 1 Volt p-p / 75 Ohm 1/50—1/120.0 00 automatic 52 –60 dB (AGC off) auto matic esp. ON /OFF OM02 HIRES CCD came ra In an anodized aluminum block which is vibration resistant and dust protect ed are mounted a CCD camera, a telecent ric objective, a near infrared illumina tor and an optical filter which has a t ransmission peak at the illuminator wav elength. The illuminator radiation pass es through the filter but the camera re ceives only the backscattered light fro m the object of the same wavelength. So , the visible environmental light is cu t-off. The connections for power in and signal out are made with connectors fixed by screws. The CCD cameras OM02 are designed.
Keywords OM02, datasheet, pdf, Sinartis, Special, CCD, Cameras, M02, 02, 2, OM0, OM, O, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)