Hybrid Couplers
w
w
w
.D
a
S a t
e e h
U 4 t
.c
om
Model JP503
Rev. A
Hybrid Couplers 3 dB, 90°
Description
The JP503 Pico Xi...
Description
w
w
w
.D
a
S a t
e e h
U 4 t
.c
om
Model JP503
Rev. A
Hybrid Couplers 3 dB, 90°
Description
The JP503 Pico Xinger is a low profile, miniature 3dB hybrid coupler in an easy to use surface mount package designed for W-CDMA and other 3G applications. The JP503 is designed for balanced amplifiers, variable phase shifters and attenuators, LNAs, signal distribution and is an ideal solution for the ever-increasing demands of the wireless industry for smaller printed circuit boards and high performance. Parts have been subjected to rigorous qualification testing and units are 100% tested. They are manufactured using materials with x and y thermal expansion coefficients compatible with common substrates.
ELECTRICAL SPECIFICATIONS**
Features:
2.0 – 2.3 GHz. 3G Frequencies Low Loss High Isolation 90o Quadrature Surface Mountable Tape And Reel New Pico-Package 100% Tested
Frequency
GHz
Isolation
dB Min
2.0 – 2.3 Amplitude Balance
dB Max
20 Phase Balance
Degrees
± 0.25
**Specification based on performance of unit properly installed on microstrip printed circuit boards with 50 Ω nominal impedance. Specifications subject to change without notice.
Outline Drawing
Top View (Near-side) .250±.010 [6.35±0.25]
Pin 1
GND Pin 4
w
w
w
.D
Pin 2 Pin 3
t a
S a
±3
e h
t e
Insertion Loss
dB Max
0.30
U 4
.c
m o
VSWR
Max:1
1.20 ΘJC
ºC/Watt
Power
Operating Temp.
ºC
Ave. CW Watts
25
27.5
-55 to +85
Side View
Bottom View (Far-side) .020±.004 TYP...
Similar Datasheet