DS3F Device DS3 Framer
• Detect and generate DS3 AIS, and idle signals • Transmit reference generator for serial operation • Transmit and recei...
Description
Detect and generate DS3 AIS, and idle signals Transmit reference generator for serial operation Transmit and receive Far End Alarm and Control (FEAC) with double word capability and automatic transmission Maskable hardware interrupt for eight alarms
Transmit single errors: framing, FEBE, C-bit parity, and P-bit parity FEBE, C-bit, and P-bit performance counters Counters for F-bit and M-bit errors
Counter for coding violations and excessive zeros Transmit-to-Receive and Receive-to-Transmit loopbacks Outputs can be set to high-impedance state Selectable mode for TXC-03401 emulation Single +5 volt power supply
Available as 68-pin plastic leaded chip carrier or 80-pin thin plastic quad flat package (TQFP)
LINE SIDE
DS3 NRZ I/O clock & data
Copyright 2001 TranSwitch Corporation TranSwitch and TXC and are registered trademarks of TranSwitch Corporation
m o .c TXC-03401B U 4 t e e h S a at .D w w TranSwitch Corporation 3 Enterprise Drive Shelton, Connecticut 06484 USA w Tel: 203-929-8810 Fax: 203-926-9453 www.transwitch.com
DS3 Framer
Transmit DS3 reference generator output Serial/nibble clock, data & frame input C-bits I/O DS3 stuff bits clocks & data Microprocessor clock & data interface Transmit errors
Document Number: TXC-03401B-MB Ed. 6, June 2001
m o .c U 4 t e e h S a t a .D w w w
APPLICATIONS
Subrate multiplexing Wideband data or video transport DS3 monitor and test Channel extenders DS3 test sets +5V
TERMINAL SIDE
DS...
Similar Datasheet