LRC-LR1206-xxxx

m o .c LRC / LRF U SERIES 4 t Standard 2512, e 2010 and 1206 sizes s e Resistance h values down to 0.003 ohms S solder-plated copper wrap-around termination Leach resistant a t Low inductance - less than 0.2nH a Standard EIA Tape - 1206 = 8mm; 2010 or 2512 = 12mm .D w w w SPECIFICATIONS: Model LR1206 LR2010 LR2512 LR1225 Resistance Range (Ohms) 0.010 to 1 TCR (ppm/°C) Power Rating at 70°C (Watts) 0.5 LOW VALUE FLAT CHIP RESISTOR ISO-9001 Registered IRC proprietary low value resistance film system High conductivity plated wrap around termination * 2 Watts with total solder pad and trace size of 300 mm2 CONSTRUCTION & MECHANICAL DIMENSIONS: Plating Wrap-around H SIZE LR1206 m o .c U 4 t e e h S a t a .D w w w Dielectric Withstanding Voltage 200 Temperature Rise at Rated Power 40°C 0.003 to 1 0.003 to 1 ±100 (Contact factory for value below 0.050 ohms) 1.0 200 80°C 1.5 / 2.0* 2.0 200 90°C 0.003 to 0.10 200 80°C Pad and Trace Area for Max Power Rating @ 70°C 30 mm2 30 mm2 100 mm2 200 mm2 LR1206 / 2010 / 2512 D L LR1225 D bottom 2 places D w H 60/40 Solder Plating Nickel Barrier Layer Copper Wraparound Termination Alumina Substrate Protective Overcoat Resistive Element W Copper Termination BOTTOM TOP L W H in. mm LR2010 in. mm in. LR2512 mm. LR1225 in. mm. 0.126 ± 0.012 3.20 ± 0.305 0.206 ± 0.015 5.23 ± 0.38 0.256 ± 0.015 6.50 ± 0.38 0.128 ± 0.010 3.25 ± 0.25 0.064 ± 0.008 1.63 ± 0.203 0.104 ± 0.010 2.64 ± 0.25 0.128 ± .010 3.25 ± 0.25 0.2...