DatasheetsPDF.com

IRKL170 Dataheets PDF



Part Number IRKL170
Manufacturers International Rectifier
Logo International Rectifier
Description (IRKT170/230/250) SCR / SCR and SCR / DIODE
Datasheet IRKL170 DatasheetIRKL170 Datasheet (PDF)

Bulletin I27102 rev. C 05/02 IRK. SERIES SCR / SCR and SCR / DIODE Features High voltage Electrically isolated base plate 3000 V RMS isolating voltage Industrial standard package Simplified mechanical designs, rapid assembly High surge capability Large creepage distances UL E78996 approved MAGN-A-pak Power Modules 170A 230A 250A Description This new IRK serie of MAGN-A-paks modules uses high voltage power thyristor/thyristor and thyristor/diode in seven basic configurations. The semiconduct.

  IRKL170   IRKL170



Document
Bulletin I27102 rev. C 05/02 IRK. SERIES SCR / SCR and SCR / DIODE Features High voltage Electrically isolated base plate 3000 V RMS isolating voltage Industrial standard package Simplified mechanical designs, rapid assembly High surge capability Large creepage distances UL E78996 approved MAGN-A-pak Power Modules 170A 230A 250A Description This new IRK serie of MAGN-A-paks modules uses high voltage power thyristor/thyristor and thyristor/diode in seven basic configurations. The semiconductors are electrically isolated from the metal base, allowing common heatsinks and compact assemblies to be built. They can be interconnected to form single phase or three phase bridges or as AC-switches when modules are connected in anti-parallel mode. These modules are intended for general purpose applications such as battery chargers, welders and plating equipment and where high voltage and high current are required (motor drives, U.P.S., etc.). Major Ratings and Characteristics Parameters IT(AV) @ 85°C IT(RMS) ITSM I t 2 IRK.170.. 170 377 IRK.230.. IRK.250.. Units 230 510 7500 7850 280 256 2800 250 555 8500 8900 361 330 3610 A A A A KA2s KA2s KA2√s V o @ 50Hz @ 60Hz @ 50Hz @ 60Hz 5100 5350 131 119 1310 I √t VDRM / VRRM TJ range 2 Up to1600 Up to 2000 Up to1600 -40 to 130 C www.irf.com 1 IRK.170, .230, .250 Series Bulletin I27102 rev. C 05/02 ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code VRRMVDRM , maximum repetitive peak reverse and off-state blocking voltage V 400 800 1200 1400 1600 800 1200 1600 1800 2000 VRSM , maximum non-repetitive peak reverse voltage V 500 900 1300 1500 1700 900 1300 1700 1900 2100 IRRM IDRM max @ 130°C mA 50 IRK.170IRK.250- 04 08 12 14 16 08 12 16 18 20 IRK.230- 50 On-state Conduction Parameters IT(AV) Maximum average on-state current @ Case temperature IT(RMS) Maximum RMS on -state current ITSM Maximum peak, one-cycle on-state, non-repetitive surge current IRK.170 IRK.230 IRK.250 Units Conditions 170 85 377 5100 5350 4300 4500 I2t Maximum I2t for fusing 131 119 92.5 I2√t Maximum I2√t for fusing 84.4 1310 0.89 1.12 1.34 0.96 1.60 500 1000 230 85 510 7500 7850 6300 6600 280 256 198 181 2800 1.03 1.07 0.77 0.73 1.59 500 1000 250 85 555 8500 8900 7150 7500 361 330 255 233 3610 0.97 1.00 0.60 0.57 1.44 500 1000 V A o 180o conduction, half sine wave as AC switch t = 10ms No voltage t = 8.3ms reapplied t = 10ms 100% VRRM Sinusoidal half wave, No voltage initial TJ = TJ max t = 8.3ms reapplied C A A KA2s t = 10ms t = 8.3ms reapplied t = 10ms 100% VRRM t = 8.3ms reapplied KA2√s t = 0.1 to 10ms, no voltage reapplied V (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. (I > π x IT(AV)), TJ = TJ max. m Ω (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. (I > π x IT(AV)), TJ = TJ max. ITM = π x IT(AV), TJ = TJ max., 180o conduction Av. power = VT(TO) x IT(AV) + rf x (IT(RMS))2 VT(TO)1Low level value of threshold voltage VT(TO)2High level value of threshold voltage rt1 rt2 VTM IH IL Low level .


IRKL26 IRKL170 IRKL230


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)