QBH870

REMEC m o Hybrid Amplifiers c . High Dynamic Range U 4 t e: Electrical Specifications e h S a t a D . w w w (1) 10 - 200 MHz Parameter Specification Limit -55 to +85 10 - 200 +0.7 / -0.8 1.4 9 1.6:1 1.6:1 +19 +32 +48 3.5 33 Units °C MHz dB dB Max dB Max p-p dB Min Max Max dBm Min QBH-870 Temperature Frequency Range Small Signal Gain Gain vs. Temperature Gain Flatness Reverse Isolation VSWR Input Output 1 dB Compression Output Intercept Point 3rd Order 2nd Order Noise Figure DC Power @ 15 Vdc ± 1% Gain vs. Vdc Housing +25 7.9 ± 0.5 0.8 10 1.5:1 1.5:1 +20 +36 +49 3.2 31 Notes: 1. Specifications are guaranteed when tested in a 50 Ohm system. Specifications indicated as typical are not guaranteed. Typical S-Parameter Data S11 MHz dB Ang 10 -16.9 143.6 40 -21.7 154.1 50 -22.1 155.7 60 -22.5 157.2 80 -23.1 162.0 90 -23.1 161.9 100 -23.1 162.2 150 -22.2 168.9 200 -20.0 174.1 .027 .018 m o .c U 4 t e e h S a t a .D w w w dBm Min dBm Min dB Max mA Max dB/Volt Max TO-8 (E52-1204) 10 9 8 7 6 5 4 Gain (dB) 25°C -55°C +85°C Absolute Maximum Ratings Power Supply Voltage Sustaining . . . . . . . . . . . .18.5 Vdc Pulse (transient) . . . . . . . .18.5 Vdc Temperature Operating . . . . . . . .-55 to +125°C Storage . . . . . . . . . .-65 to +150°C Thermal Rise, junction-to-case . . . .+21°C 5.0 4.0 3.0 2.0 1.0 Noise Figure (dB) S21 dB Ang 7.8 8.2 8.1 -10.2 8.2 -14.2 8.1 -18.1 8.1 -25.4 8.1 -29.0 8.1 -32.5 8.0 -49.8 7.9 -66.7 S12 S22 dB Ang dB Ang -11.1 8.3 -16.7 145.9 -10.9...