Hybrid Amplifiers
REMEC
Hybrid Amplifiers
High Dynamic Range
Electrical Specifications
Parameter
Temperature Frequency Range Small Signal...
Description
REMEC
Hybrid Amplifiers
High Dynamic Range
Electrical Specifications
Parameter
Temperature Frequency Range Small Signal Gain Gain vs. Temperature Gain Flatness Reverse Isolation VSWR Input Output 1 dB Compression Output Intercept Point 3rd Order 2nd Order Noise Figure (2) DC Power @ 15 Vdc ± 1% Gain vs. Vdc Housing
w
w
a D . w
S a t
e: e h
(1)
U 4 t
.c
om
30 - 2000 MHz
Specification Limit -55 to +65 30 - 2000 10.3 ± 0.8 +0.6 / -0.6 1.0 1.0 19 18 1.8:1 2.0:1 1.8:1 2.0:1 +29 +28 +42 +48 4.5 400 +40 +46 6.0 450 +25
Units °C MHz dB dB Max dB Max p-p dB Min Max Max dBm Min dBm Min dBm Min dB Max mA Max dB/Volt Max
QBH-872
Absolute Maximum Ratings Power Supply Voltage Sustaining . . . . . . . . . . . .16.0 Vdc Pulse (transient) . . . . . . . .16.0 Vdc Temperature Operating . . . . . . . . .-55 to +65°C Storage . . . . . . . . . .-65 to +150°C Max Input Drive . . . . . . . . .2.8 VRMS Thermal Rise, junction-to-case . . . .+87°C
TO-8 (E52-1202-1)
Notes: 1. Specifications are guaranteed when tested in a 50 Ohm system. Specifications indicated as typical are not guaranteed. 2. Noise Figures increase below 500 MHz.
Typical S-Parameter Data
MHz 30 80 200 500 800 1100 1400 1700 2000
S11 dB Ang -13.7 -23.6 -14.2 -22.5 -14.3 -40.3 -14.7 -89.3 -15.0 -133.6 -15.8 -172.8 -17.5 147.8 -21.2 105.5 -26.8 24.1
S21 dB Ang 10.1 -173.0 10.1 171.3 10.0 149.1 9.9 100.1 9.9 52.2 9.9 4.7 10.0 -43.7 10.1 -93.4 10.1 -144.4
Æ .557 .545
.027 .018
w
.611 Æ .595 Æ .400
w
Æ .019 .016
.D...
Similar Datasheet