Integrated Circuit For Standby Power-Supply Control
TA1307P
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA1307P
Integrated Circuit For Standby Power-Suppl...
Description
TA1307P
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA1307P
Integrated Circuit For Standby Power-Supply Control
TA1307P is a switching power-supply IC used as a standby power-supply control such as small power-supply. This IC, Slight power-supply can do that a MOSFET is controlled in intermittent, and this IC is optimum IC as objects for power-supply control, such as color TV, monitor, VCR, DVD, FAX, printer, etc.
Main Characteristics
· · · Burst mode PWM pulse output The over current protection circuits to power MOSFET for a drive are built in. UVLO (Under Voltage Lock Out), OVLO (Over Voltage Lock Out) with Latch, OVLO on/off function OCL (Over Current Limmiter), Select SW for IC active/IC not active are built in. · · The starting current until UVLO is canceled about 100 µA. Wide range input voltage: (85 V to 264 V).
Weight: 0.5 g (typ.)
1
2002-02-12
TA1307P
Stand Power Supply Application Circuit Example (voltage detection by 2nd side)
Pulse out
GND2
GND1
8
7
6
OCL
5
Pulse output Band gap UVLO 7 V/5 V UVLO 12 V Latch OSC establish OSC
Output stop 0.2 V 3 V (pulse output stop) /2.5 V (pulse output start) Standby ON/OFF Vout Standby SW FB
Vcc
1 0.01 mF 20 mF
2
3 0.01 mF
4
Hi: Standby OFF mode …IC not active Pin2 (OSC establish) Low: Standby ON mode (OVLO off) …IC active Outside resistance use ±2% Open: Standby ON mode (OVLO on) …IC active
3 V (fix)
= Upper limit DC for FB comparator
FB IN
2.5 V (fix)
= Lower limit DC for FB comparat...
Similar Datasheet