(EX1/EX2 Series) Automotive Relays
w
w
at .D w
DESCRIPTION
The new NEC EX2/EX1 series is PC-board mount type and the most suitable for various motor and...
Description
w
w
at .D w
DESCRIPTION
The new NEC EX2/EX1 series is PC-board mount type and the most suitable for various motor and heater controls in the automobiles which require high quality and high performance. The EX2 series is succeeding in about 60% of miniaturization in comparison with the ET2 series. The EX1 series is succeeding in about 50% of miniaturization in comparison with the ET1 series. The EX2/EX1 series is under development now.
h S a
t e e
4U
m o .c
DATA SHEET
AUTOMOTIVE RELAYS
EX2/EX1 SERIES
FEATURES
PC-board mounting Lead free solder is used Approx. 75% relay volume of ET2 Approx. 65% relay volume of ET1 Approx. 60% relay space of ET2 Approx. 50% relay space of ET1 Approx. 88% relay weight of ET2 Approx. 78% relay weight of ET1
APPLICATIONS
Motor control Solenoid control
DO NOT EXCEED MAXIMUM RATING
Do not use relay under excessive conditions such as over ambient temperature, over voltage and over current. Incorrect use could result in abnormal heating and damage to the relay or other parts.
READ CAUTIONS IN THE SELECTION GUIDE
w
w
.D w
t a
S a
e h
t e
U 4
.c
m o
EX2 SERIES
EX1 SERIES
For Proper Use of Miniature Relays
Read the cautions described in NEC’s “Miniature Relays” (ER0046EJ*) before dose designing your relay applications.
This information in this document is subject to change without notice. Document No. ERCP02-012-04 Date Published March 2004 Printed in Japan
1
Phone 707-996-5201 Fax 707-996-3380
w
w
w
...
Similar Datasheet