DatasheetsPDF.com

T-51638D084J-FW_A_AB Dataheets PDF



Part Number T-51638D084J-FW_A_AB
Manufacturers OPTREX
Logo OPTREX
Description LCD_Module
Datasheet T-51638D084J-FW_A_AB DatasheetT-51638D084J-FW_A_AB Datasheet (PDF)

m o .c Technical Specification LCD Module U 4 t e e h T-51638D084J-FW-A-AB S a at .D w w w Type No. First Edition Oct 20, 2003 Final Revision * Approved by (Quality Assurance Division) No. -1 2 3 4 5 6 7 8 9 10 11 ---- m o .c U 4 t e e h S a t a .D w w w Prepared by (Module Coordination Group) Checked by (ACI Engineering Division) Item Page 1 2 3 3 6 7 CONTENTS OVERVIEW ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS INTERFACE PIN CONNECTION INTERFACE TIMING BLOCK DIAGRAM .

  T-51638D084J-FW_A_AB   T-51638D084J-FW_A_AB



Document
m o .c Technical Specification LCD Module U 4 t e e h T-51638D084J-FW-A-AB S a at .D w w w Type No. First Edition Oct 20, 2003 Final Revision ****** Approved by (Quality Assurance Division) No. -1 2 3 4 5 6 7 8 9 10 11 ---- m o .c U 4 t e e h S a t a .D w w w Prepared by (Module Coordination Group) Checked by (ACI Engineering Division) Item Page 1 2 3 3 6 7 CONTENTS OVERVIEW ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS INTERFACE PIN CONNECTION INTERFACE TIMING BLOCK DIAGRAM 10 11 13 15 16 17 20 24 26 MECHANICAL SPECIFICATION OPTICAL CHARACTERISTICS RELIABILITY TEST CONDITION INSPECTION STANDARDS HANDLING PRECAUTIONS FOR TFT-LCD MODULE PACKAGING SPECIFICATION PRODUCT NUMBER LABELING FORMS LAMP UNIT FOR 8.4” VGA T-51638D084J-FW-A-AB (AB) No. 2003-0193 OPTREX CORPORATION m o .c U 4 t e e h S a at .D w w w Page 1/32 1. OVERVIEW T-51638D084J-FW-A-AB is 8.4” color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit, and backlight unit. By applying 6 bit digital data, 640 × 480, 262,144-color images are displayed on the 8.4” diagonal screen. Input power voltage is single 3.3V for LCD driving. Inverter for backlight is not included in this module. General specifications are summarized in the following table: ITEM Display Area (mm) Number of Dots Pixel Pitch (mm) Color Pixel Arrangement Display Mode Number of Colors Contrast ratio Optimum Viewing Angle(Contrast ratio) Brightness (cd/m2) Module Size (mm) Module Mass (g) Backlight Unit Surface Treatment SPECIFICATION 170.9(H) × 128.2 (V) (8.4-inch diagonal) 640 × 3 (H) × 480 (V) 0.267 (H) × 0.267 (V) RGB vertical stripe normally white 262,144 450 6 o’clock 450 199.5 (W) × 149.0 (H) × 11.5 (D) 360(Typ) CCFL, 2-tubes, edge-light, replaceable Anti-glare and hard-coating 3H Characteristic value without any note is typical value. The LCD product described in this specification is designed and manufactured for the standard use in OA equipment and consumer products, such as computers, communication equipment, industrial robots, AV equipment and so on. Do not use the LCD product for the equipment that require the extreme high level of reliability, such as aerospace applications, submarine cables, nuclear power control systems and medical or other equipment for life support. OPTREX assumes no responsibility for any damage resulting from the use of the LCD product in disregard of the conditions and handling precautions in this specification. If customers intend to use the LCD product for the above items or other no standard items, please contact our sales persons in advance. T-51638D084J-FW-A-AB (AB) No. 2003-0193 OPTREX CORPORATION Page 2/32 2. ABSOLUTE MAXIMUM RATINGS ITEM Power Supply Voltage for LCD Logic Input Voltage Lamp Voltage Lamp Current Lamp Frequency Operation Temperature *1) Storage Temperature *1) SYMBOL VCC VI VL IL FL Top Tstg MIN. 0 0 0 0 -0 -20 MAX. 4.0 6.0 1500 8.0 80 60 65 UNIT V V Vrms mArms kHz °C °C [Note] *1) Top,Tstg ≤ 40°C : 90%RH max. without condensation Top,Tstg > 40°C : Absolute humidity shall be less than the value of 90%RH at 40°C without condensation. 3. ELECTRICAL CHARACTERISTICS (1) TFT- LCD ITEM Power Supply Voltages for LCD Power Supply Currents for LCD Permissive input ripple Voltage Logic Input Voltage (2) Backlight ITEM Lamp Voltage Lamp Current Lamp Frequency Starting Lamp Voltage Lamp Life Time SYMBOL MIN. VL IL FL VS LT -3.0 30 670 50000 TYP. 450 6.5 ---MAX. -7.0 60 --UNIT Vrms mArms kHz Vrms h High Low SYMBOL VCC ICC VRP VIH VIL MIN. 3.0 --2.4 0 TYP. 3.3 240 ---Ambient Temperature: Ta = 25°C MAX. 3.6 400 100 5.5 0.8 UNIT V mA mVp-p V V Remarks Note A) (See: Page 5,6) Note B) (See: Page 6) VCC=+3.3V VCC=MAX VCC=MIN Ta = 25°C Remarks IL = 6.5 mArms *1),*5) *2) *3),*4) IL = 6.5 mArms *1) Lamp Current measurement method (The current meter is inserted in low voltage line.) CTL A LCD Module CTH CTL CTH A Inverter Power Supply T-51638D084J-FW-A-AB (AB) No. 2003-0193 OPTREX CORPORATION Page 3/32 *2) Lamp frequency of inverter may produce interference with horizontal synchronous frequency, and this may cause horizontal beat on the display. Therefore, please adjust lamp frequency, and keep inverter as far from module as possible or use electronic shielding between inverter and module to avoid the interference. *3) Lamp life time is defined as the time either when the brightness becomes 50% of the initial value, or when the starting lamp voltage does not meet the value specified in this table. *4) The life time of the backlight depends on the ambient temperature. The life time will decrease under low/high temperature. *5) Please use the inverter which has symmetrical current wave form as follows, The degree of unbalance: less than 10% The ratio of wave height: less than IPH IPL CURRENT WAVE FORM [Note] A) Power and signals sequence: t1 ≤ 10 ms 0 < t2 ≤ 50 ms 0 < t3 ≤ 50 ms 0 ≤ t4 ≤ 50 ms VCC 3.0 V data 2.2 V 0.5 V 0.5 V 3.0 V 2 ±10% IPH: H.


T-51638D084-FW_A_AA T-51638D084J-FW_A_AB T-51756D121J-FW_A_AA


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)