3 A MOLD TRIAC
The AC03EGM and AC03FGM are fully diffused mold TRIACs
with an effective on-current of 3 A. The repeat peak off-voltages
are 400 V and 600 V.
PACKAGE DRAWING (UNIT: mm)
• Gate trigger current (mode I, III, and IV) at 12 mA or less is
• This transistor features a small and lightweight package and is
easy to handle even on the mounting surface due to its TO-
202AA dimensions. Processing of lead wires and heatsink
(tablet) using jigs is also possible.
• High degrees-of-freedom applications design is available due to
high gate trigger sensitivity and small hold current distribution.
• Employs flame-retardant epoxy resin (UL94V-0).
Noncontact switches of motor
temperature control, lamp light control
*TC test bench-mark
Standard weight: 1.4 g
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
Non-repetitive peak off-state voltage
Repetitive peak off-voltage
Effective on-state current
Surge on-state current
Critical rate of rise of on-state
Peak gate power dissipation
Average gate power dissipation
Peak gate current
3 (TC = 92°C)
30 (50 Hz 1 cycle)
33 (60 Hz 1 cycle)
4.0 (1 ms ≤ t ≤ 10 ms)
3 (f ≥ 50 Hz, Duty ≤ 10 %)
±0.5 (f ≥ 50 Hz, Duty ≤ 10 %)
−40 to +125
−55 to +150
A Refer to Figures
11 and 12.
A Refer to Figure 2.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D13536EJ3V0DS00 (3rd edition)
Date Published April 2002 N CP(K)
Printed in Japan