Lithium Battery Protection
MC33351A
Advanced Information Lithium Battery Protection Circuit for Three Battery Packs
The MC33351A is a monolithic l...
Description
MC33351A
Advanced Information Lithium Battery Protection Circuit for Three Battery Packs
The MC33351A is a monolithic lithium battery protection circuit that is designed to enhance the useful operating life of three cell rechargeable battery packs. The MC33351A is specifically designed to be placed in a lithium battery pack where the battery cells continuously power it. In order to maintain cell operation within specified limits, the protection circuit senses cell voltages, and discharge current, and correspondingly controls the state of two P–channel MOSFET switches. These switches are connected in series with the positive terminal of the third cell and the positive terminal of the battery pack. During a fault condition, the MC33351A open circuits the pack by turning off one of these MOSFET switches.
Features http://onsemi.com MARKING DIAGRAMS
20
1
TSSOP–20 DTB SUFFIX CASE 948E
Selectable Charge Interrupt Voltage Sensing Mode for Precise Cell Programmable Overvoltage Delay Choice of Discharge Current Limit Sensing Elements consisting of
Voltage Measurements
either Low–Side Resistor or High–Side MOSFET Switches Programmable Discharge Current Limit Threshold and Shutdown Delay Selectable Cell Voltage Balancing Virtually Zero Current Sleepmode State when Cells are Discharged Minimum External Components for Inclusion within the Battery Pack Available in Low Profile Surface Mount Package
Typical Three Cell Smart Battery Pack
VCC/ High–Side Discharge Current ...
Similar Datasheet