DatasheetsPDF.com

X29LV320MBTC Dataheets PDF



Part Number X29LV320MBTC
Manufacturers Macronix International
Logo Macronix International
Description MX29LV320MBTC
Datasheet X29LV320MBTC DatasheetX29LV320MBTC Datasheet (PDF)

MX29LV320T/B 32M-BIT [4M x 8 / 2M x 16] SINGLE VOLTAGE 3V ONLY FLASH MEMORY FEATURES GENERAL FEATURES • 4,194,304 x 8 / 2,097,152 x 16 switchable • Sector Structure - 8K-Byte x 8 and 64K-Byte x 63 • Extra 64K-Byte sector for security - Features factory locked and identifiable, and cuswww.DataSheet4U.com tomer lockable • Twenty-Four Sector Groups - Provides sector group protect function to prevent program or erase operation in the protected sector group - Provides chip unprotect function to allow.

  X29LV320MBTC   X29LV320MBTC



Document
MX29LV320T/B 32M-BIT [4M x 8 / 2M x 16] SINGLE VOLTAGE 3V ONLY FLASH MEMORY FEATURES GENERAL FEATURES • 4,194,304 x 8 / 2,097,152 x 16 switchable • Sector Structure - 8K-Byte x 8 and 64K-Byte x 63 • Extra 64K-Byte sector for security - Features factory locked and identifiable, and cuswww.DataSheet4U.com tomer lockable • Twenty-Four Sector Groups - Provides sector group protect function to prevent program or erase operation in the protected sector group - Provides chip unprotect function to allow code changing - Provides temporary sector group unprotect function for code changing in previously protected sector groups • Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations • Latch-up protected to 250mA from -1V to Vcc + 1V • Low Vcc write inhibit is equal to or less than 1.4V • Compatible with JEDEC standard - Pinout and software compatible to single power supply Flash PERFORMANCE • High Performance - Fast access time: 70/90/120ns - Fast program time: 7us/word typical utilizing accelerate function - Fast erase time: 1.6s/sector, 112s/chip (typical) • Low Power Consumption - Low active read current: 10mA (typical) at 5MHz - Low standby current: 200nA (typical) • Minimum 100,000 erase/program cycle • 10-year data retention SOFTWARE FEATURES • Erase Suspend/ Erase Resume - Suspends sector erase operation to read data from or program data to another sector which is not being erased • Status Reply - Data polling & Toggle bits provide detection of program and erase operation completion • Support Common Flash Interface (CFI) HARDWARE FEATURES • Ready/Busy (RY/BY) Output - Provides a hardware method of detecting program and erase operation completion • Hardware Reset (RESET) Input - Provides a hardware method to reset the internal state machine to read mode • WP/ACC input pin - Provides accelerated program capability PACKAGE • 48-Pin TSOP • 48-Ball CSP GENERAL DESCRIPTION The MX29LV320T/B is a 32-mega bit Flash memory organized as 4M bytes of 8 bits and 2M words of 16 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29LV320T/B is packaged in 48-pin TSOP and 48-ball CSP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers. The standard MX29LV320T/B offers access time as fast as 70ns, allowing operation of high-speed microprocessors without wait states. To eliminate bus contention, the MX29LV320T/B has separate chip enable (CE) and output enable (OE) controls. MXIC's Flash memories augment EPROM functionality with in-circuit electrical erasure and programming. The MX29LV320T/B uses a command register to manage this functionality. MXIC Flash technology reliably stores memory contents even after 100,000 erase and program cycles. The MXIC cell is designed to optimize the erase and program mechanisms. In addition, the combination of advanced tunnel oxide processing and low internal electric fields for erase and programm.


DM0265R X29LV320MBTC SMA4036


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)