DatasheetsPDF.com

MPZ5-180 Dataheets PDF



Part Number MPZ5-180
Manufacturers ETC
Logo ETC
Description (MPZ5-xx Series) Silicon Power Transient Suppressor
Datasheet MPZ5-180 DatasheetMPZ5-180 Datasheet (PDF)

MPZ5-16 - MPZ5-32 - MPZ5-180 Series Silicon power transient suppressor designed for applications requiring protection of voltage sensitive electronic devices in danger of destruction by high energy voltage transients. Individual cells are matched to insure current-sharing under high current pulse conditions. MAXIMUM RATINGS Transient Power Dissipation: 40 kW Pulse Width: 0.1 ms, (See Figure 1) DC Power Dissipation: 350 Watts @ Tc = 25°C (Derate 2.33 W/° C above 25° C) Operating Junction & Stora.

  MPZ5-180   MPZ5-180



Document
MPZ5-16 - MPZ5-32 - MPZ5-180 Series Silicon power transient suppressor designed for applications requiring protection of voltage sensitive electronic devices in danger of destruction by high energy voltage transients. Individual cells are matched to insure current-sharing under high current pulse conditions. MAXIMUM RATINGS Transient Power Dissipation: 40 kW Pulse Width: 0.1 ms, (See Figure 1) DC Power Dissipation: 350 Watts @ Tc = 25°C (Derate 2.33 W/° C above 25° C) Operating Junction & Storage Temperature Range: - 65° C to +175° C Polarity: Anode-to-Case is Standard Cathode-to-Case Available Upon Request ELECTRICAL CHARACTERISTICS (TA = 25°C) (VF = 1.5 V max @ 10 A for all types) Nominal Operating Voltage (Note 1) VOP (PK) Vdc 14 14 28 28 28 165 165 165 VOP(RMS) V rms 10 10 20 20 20 117 117 117 Maximum Device Clamping Minimum Zener Factor Voltage ) VZ @ IZ (pulse CF= VZ(min) @ IZT VZ @ IZT (Note 2) Vdc Adc 1.25 16 0.4 1.25 16 04 1.25 32 0.2 1.25 32 0.2 1.25 32 0.2 1.14 180 003 1.14 180 0.03 1.14 180 0.03 Type Maximum Zener Voltage Pulse Width = 1.0 ms VZ(max) @ IZ (pulse) Vdc Adc 24 200 20 200 50 100 45 100 40 100 250 20 225 20 205 20 Maximum Reverse Current IR(max) uAdc 50 50 50 50 50 50 50 50 Typical Capacitance C (typ) uF 0.025 0.025 0.011 0.011 0.011 0.0012 0.0012 0.0012 @ VR = VOP (PK) @VR = VOP(PK) MPZ5-16A -16B -32A -32B -32C -180A -180B -180C www.DataSheet4U.com www.DataSheet4U.com MPZ5-16 series, MPZ5-32 series, MPZ5-180 series (continued) NOTE t: Nominal operating voltage is defined as normal input voltage to device for non-operating condition. If non-sinusoidal wave or dc input is present, peak voltage input values VOP(PK) should be used to select device type. NOTE 2: The maximum device clamping factor CF is a ratio of VZ measured at IZ (pulse) given in the Electrical Characteristics Table divided by VZ measured at IZT under steady state conditions. This value guarantees the sharpness of the voltage breakdown of individual devices. Figure 2 demonstrates the typical sharpness of the breakdown, and indicates the voltage regulation over a wide range of currents. ÄVZ = VZ @ IZ(pulse) - VZ @ IZT .


MPZ5-16 MPZ5-180 MPZ5-32


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)