FD-235HF

Features & Specs. FD-235HF SERIES, 3.5" FLOPPY DISK DRIVE Features Supports 720KB and 1.44MB floppy formats. Utilizes rugged die-cast frame. Easy to install into any available 3.5" drive bay. Retail kit also available. Kit includes drive, 5.25" installation hardware & manual. Specifications Recording Method: Media: Motor Starting Time: Average Latency Time: Index: MTTF: MTTR: Error Rate: FM or MFM High density (2HD) or normal density (2DD) 3.5" micro floppy disk 480msec.or less 100msec. (300rpm) 1/revolution Detection Interval: 200msec. +or- 1.5%(300rpm) 30,000 POH or more When failure, the FDD should be replaced in unit of the drive. Soft read error:1/10 to the 9th bits or less Hard read error:1/10 to the 12th bits or less Seek error:1/10 to the 6th seeks or less Approved by UL, CSA, TUV Operating: 4~51.7 deg. C (39~125 deg. F) Storage: -22~60 deg. C (-8~140 deg. F) Transportation: -40~65 deg. C (-40~149 deg. F) Safety Standards: Ambient Temperature: Temperature Gradient: Operating: 20 deg. C (68 deg. F)/hour or less(non-condensing) www.DataSheet4U.com Storage and Transportation:30 deg. C (86 deg. F)/hour or less (non-condensing) www.DataSheet4U.com Relative Humidity: Operating: 20~80% (non-condensing) [Maximum wet-bulb temperature of 29.4 deg. C (85 degrees F)] Storage: 5~90% (non-condensing) [Maximum wet-bulb temperature of 40 degrees C (104 deg. F)] Transportation: 5~95% (non-condensing) [Maximum wet-bulb temperature of 45 degrees C (113 deg. F)] Opera...