HD48125 Solid-State Relay Datasheet

HD48125 Datasheet, PDF, Equivalent


Part Number

HD48125

Description

(HD48110 / HD48125) Solid-State Relay

Manufacture

Crydom

Total Page 2 Pages
Datasheet
Download HD48125 Datasheet


HD48125
Series 1-110/125A
120/240, 480 Vac - AC OUTPUT
• Zero Voltage and Random
Turn-On Switching
• Panel Mount
• Internal Snubber
Integrated Overvoltage
Protection by Automatic
Self Turn-On (Suffix P)
MODEL NUMBERS
OUTPUT SPECIFICATIONS 1
AC CONTROL
DC CONTROL
A24110
D24110
Featuring state-of-the-art Surface
Mount Technology, these SPST-NO
relays deliver proven reliability in the
most demanding applications.
Output consists of an SCR AC switch
and is available in zero-cross, random
turn-on (phase controllable) and ver-
sions with either AC or DC input (coil)
control.
Manufactured in Crydom’s ISO 9001
Certified facility for optimum product
performance and reliability.
A24125
D24125
HA48110
HD48110
HA48125
HD48125
Operating Voltage (47-63 Hz) [Vrms]
Max. Load Current 3 [Arms]
Min. Load Current, [mArms]
Transient Overvoltage [Vpk]
Max. Surge Current, (16.6ms) [Apk]
Max. On-State Voltage Drop @ Rated Current [Vpk]
Thermal Resistance Junction to Case (R θJC) [°C/W]
Maximum I 2 t for Fusing, (8.3 msec.) [A 2 sec]
Max. Off-State Leakage Current @ Rated Voltage [mArms]
Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] 2
Max. Turn-On Time 4
Max. Turn-Off Time
Power Factor (Min.) with Max. Load
24-280
24-280
48-530
110 125 110
150 150 150
600 600 1200
1500 1750 1500
1.7 1.7 1.7
.25 .22 .25
9,340 12,700 9,340
10 10 10
500 500 500
1/2 Cycle (DC Control), 10.0 msec (AC Control)
1/2 Cycle (DC Control), 40.0 msec (AC Control)
0.5 0.5 0.5
48-530
125
150
1200
1750
1.7
.22
12,700
10
500
0.5
INPUT SPECIFICATIONS 1
Control Voltage Range
DC CONTROL
(D PREFIX)
3-32 Vdc
AC CONTROL
(A PREFIX)
90-280 Vrms (60Hz)
24V AC/DC CONTROL
(E SUFFIX)
18-36 Vrms/Vdc
Max. Reverse Voltage
-32 Vdc
--- ---
Max. Turn-On Voltage
3.0 Vdc
90 Vrms
18 Vrms/Vdc
Min. Turn-Off Voltage
1.0 Vdc
10 Vrms
4.0 Vrms/Vdc
Nominal Input Impedance
1500 Ohms (120/240V Models) 5
60K Ohms
9.0K Ohms
Typical Input Current
3.4mA @ 5 Vdc, 20mA @ 28Vdc 5
2mA @ 120 Vrms, 4mA @ 240 Vrms
3mA @ 24 V
GENERAL NOTES
1 All parameters at 25°C unless otherwise specified.
2 Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3 Heat sinking required, for derating curves see page 2.
4 Turn-on time for random turn-on versions is 0.02 msec (DC Control Models).
5 Input circuitry for 480V models incorporates active current limiter with 2mA typical input current..
© 2005 CRYDOM CORP, Specifications subject to change without notice.
Series 1-110/125.
Rev. 082505
PAGE 1 OF 2
www.DataSheet4U.com
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: sales@crydom.com WEB SITE: http://www.crydom.com
UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com.
GERMANY: +49 (0)180 3000 506

HD48125
AVAILABLE OPTIONS
E 24V AC/DC Input
Example: A24110E
G Input Status LED.
Agencies Approval Pending
Example: HD48125G
Note: Control Voltage Range 4.5-32Vdc
for DC Control Models.
P Internal Overvoltage Protection.
Relay Will Self Trigger Between
450-600 Vpk (for 240Vac Models 125A)
& 900-1200Vpk (for 480Vac Models125A).
Not Suitable For Capacitive Loads.
Agencies Approval Pending.
Example: D24125P (AC & DC Control)
Example: HD48125P (AC & DC Control)
-10 Random Turn-On (AC & DC Control)
Phase Controllable (DC Control)
Example: D24110-10
H Heat Tranfer Pad (Attached)
Example: D24110H
Series 1-110/125A
120/240, 480 Vac - AC OUTPUT
GENERAL SPECIFICATIONS
Dielectric Strength 50/60Hz Input/Output/Base
Insulation Resistance (Min.) @ 500 Vdc
Max. Capacitance Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
4000 Vrms
10 9 Ohm
8 pF
-40 to 80°C
-40 to 125°C
MECHANICAL SPECIFICATIONS
Weight: (typical)
3.0 oz. (86.5g)
Encapsulation:
Thermally Conductive Epoxy
Terminals:
Screws and Saddle Clamps Furnished, Unmounted
Crydom Heat Sinks offer excellent
thermal management and are per
fectly matched to the load current
ratings of Crydom panel mount
relays. Request Crydom’s Heat Sink
specification sheet for all the details.
Screw Torque Requirements:
6-32 Screws - 10 in./lbs.,
8-32 and 10-32 Screws - 20in./lbs.
(Screws dry without grease.)
MOUNTING
HOLE/SLOT
0.17 (4.3) DIA.
1.10
(27.9)
.45
(11.4)
8-32 TERMINAL
(2 PLACES )
1.87
(47.5)
1 OUTPUT
--
4 INPUT
2 2.30
(58.4)
1.70
+ (43.2)
3
BASE PLATE
.125 (3.2)
Ordering System: Combination of the
suffixes should be made in the following order:
EPG-10.
Example: HA48125EPG-10
1.00
(25.4)
1.80
(45.7)
6-32 TERMINAL
(2 PLACES)
.78
(19.8)
.90
(22.9)
All dimensions are in inches (millimeters)
APPROVALS
UL E116950
Series 1-110/125
Rev. 082505
PAGE 2 OF 2
CURRENT DERATING CURVES
110A
160
.4°C/W
90
120
.5°C/W
.2°C/W
100
80
1°C/W
110
40
120
0
30 60 90 120 0 20 40 60 80
Load Current [Arms]
Max Ambient Temp. [°C]
125A
160
.4°C/W
90
120
.5°C/W
.2°C/W
100
80
1°C/W
110
40
120
0
30 60 90 120 0 20 40 60 80
Load Current [Arms]
Max Ambient Temp. [°C]
© 2005 CRYDOM CORP, Specifications subject to change without notice.
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: sales@crydom.com WEB SITE: http://www.crydom.com
UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com.
GERMANY: +49 (0)180 3000 506


Features Series 1-110/125A 120/240, 480 Vac - AC OUTPUT • Zero Voltage and Random Tur n-On Switching • Panel Mount • Inte rnal Snubber • Integrated Overvoltag e Protection by Automatic Self Turn-On (Suffix P) Featuring state-of-the-art Surface Mount Technology, these SPST-NO relays deliver proven reliability in t he most demanding applications. Output consists of an SCR AC switch and is ava ilable in zero-cross, random turn-on (p hase controllable) and versions with ei ther AC or DC input (coil) control. Man ufactured in Crydom’s ISO 9001 Certif ied facility for optimum product perfor mance and reliability. A24125 D24125 HA 48110 HD48110 HA48125 HD48125 MODEL NU MBERS OUTPUT SPECIFICATIONS 1 Operatin g Voltage (47-63 Hz) [Vrms] Max. Load C urrent AC CONTROL DC CONTROL A24110 D 24110 24-280 110 150 600 1500 1.7 .25 9,340 10 500 24-280 125 150 600 1750 1 .7 .22 12,700 10 500 48-530 110 150 12 00 1500 1.7 .25 9,340 10 500 48-530 12 5 150 1200 1750 1.7 .22 12,700 10 500 3 [Arms] Min. Load Current, [mAr.
Keywords HD48125, datasheet, pdf, Crydom, HD48110, /, HD48125, Solid-State, Relay, D48125, 48125, 8125, HD4812, HD481, HD48, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)