MB86H20B

www.DataSheet4U.com Product Profile MB86H20B INTRODUCTION: This SmartMPEG is an integrated MPEG-2 settop-box decoder which includes the hardware extensions required to support a low Bill of Material for Set-TopBoxes and IDTVs. SmartMPEG FEATURES December 2004 Edition 1.1 FME/MM/PP/1204 MPEG-2 Decoder for Set-Top-Boxes MPEG2 video ISO/IEC 13818-2 ([email protected]@ML) MPEG audio layer 1/2 32-bit RISC CPU (ARC Tangent A4 @130.5MHz) 4K I-cache, 2K D-cache Three timers / watchdog / power-down mode Highlights of the SmartMPEG include an ARC Shared memory interface (SDRAM, 16/32 bit data), RISC CPU (@130.5MHz), two transport stream 64Mbit...1Gbit demultiplexers with integrated DVB descramblers, a PAL/ Universal processor interface (IDE, NAND/NOR NTSC/SECAM digital video encoder and a display FLASH & Common Interface) controller, which overlays up to four layers of graphic data. Two transport stream decoders (decoding/recording) A specially designed, shared SDRAM memory interface including two DVB descramblers for the CPU and MPEG decoder connects to a single Flexible MPEG video resizing (factor 1/16 to 2) SDRAM device using either a 16 or 32-bit data bus Display controller with up to 4 true colour graphic or depending on customer bandwidth requirements. The CLUT layers (total 6 layers) included universal processor interface allows simple Flexible frame rate conversion (e.g. 50/60Hz) connection to FLASH, hard disk drives (IDE), Common Flicker fixer for better ...