DatasheetsPDF.com

FDC05 Dataheets PDF



Part Number FDC05
Manufacturers Bellus
Logo Bellus
Description 5 WATTS OUTPUT POWER
Datasheet FDC05 DatasheetFDC05 Datasheet (PDF)

FDC05-SERIES • • • • • • • UL E193009 TUV R3-50007936 CB JPTUV-003641 CE MARK 5 WATTS OUTPUT POWER 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE INTERNATIONAL SAFETY STANDARD APPROVAL SIX-SIDED CONTINUOUS SHIELD HIGH EFFICIENCY UP TO 83% STANDARD 2” X 1” X 0.4” PACKAGE FIXED SWITCHING FREQUENCY The FDC05 and FDC05-W series offer 5 Watts of output power from a 2 x 1 x 0.4 inches package without derating to 71ºC ambient temperature. FDC05 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. FD.

  FDC05   FDC05



Document
FDC05-SERIES • • • • • • • UL E193009 TUV R3-50007936 CB JPTUV-003641 CE MARK 5 WATTS OUTPUT POWER 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE INTERNATIONAL SAFETY STANDARD APPROVAL SIX-SIDED CONTINUOUS SHIELD HIGH EFFICIENCY UP TO 83% STANDARD 2” X 1” X 0.4” PACKAGE FIXED SWITCHING FREQUENCY The FDC05 and FDC05-W series offer 5 Watts of output power from a 2 x 1 x 0.4 inches package without derating to 71ºC ambient temperature. FDC05 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. FDC05-W series have 4:1 ultra wide input voltage of 9-36 and 18-75VDC. The FDC05 and FDC05-W features 1600VDC of isolation, short-circuit protection, as well as six sided shielding. The safety approve with EN60950 and UL1950. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. According the extended operation temperature range, there are “M1” and “M2” version for special application. TECHNICAL SPECIFICATION OUTPUT SPECIFICATIONS Output power Voltage accuracy Minimum Full load and nominal Vin All specifications are typical at nominal input, full load and 25ºC otherwise noted GENERAL SPECIFICATIONS 5 Watts max ± 2% 10% of FL ± 0.2% ± 0.2% ± 1% Approvals and standard 100% FL ± 5% Case material Base material Potting material Dimensions Weight MTBF (Note 3) Standard M1 (Note 4) M2 (W series) Efficiency Isolation Voltage Isolation resistance Isolation capacitance Switching frequency Standard “W” series Input to Output to Case See table 1600VDC, min 109ohms, min 300pF, max 300KHz, typ 200KHz, typ load (Note 1) Line regulation LL to HL at Full Load Load regulation Cross regulation (Dual) Ripple and noise 10% to 100% FL Single Dual Asymmetrical load 25% IEC60950, UL1950, EN60950 Nickel-coated copper Non-conducted black plastic Epoxy (UL94-V0) / 50mVp20MHz bandwidth p ºC, ±0.02% / Temperature coefficient max 25% load step change FL to 1/2 Transient Single 200uS response recovery FL ±1% error band Dual 200uS time Over load % of FL at input 170% typ protection nominal Short circuit protection Continuous, automatics recovery 12V nominal input 24V nominal input 48V nominal input 24V nominal input 48V nominal input 9 – 18VDC 18 – 36VDC 36 – 75VDC 9 – 36VDC 18 – 75VDC Pi type 12V input 24V input 48V input Nominal Vin and full load 36VDC 50VDC 100VDC 20mAp-p 600mS typ 2.00 X 1.00 X 0.40 Inches (50.8 X 25.4 X 10.2 mm) 27g (0.95oz) 3.145 x 106hrs ENVIRONMENTAL SPECIFICATIONS Operating temperature range (Reference derating curve) Maximum case temperature Storage temperature range Thermal impedance (Note 5) Nature convection Nature convection with heat-sink Thermal shock Vibration Relative humidity -25ºC ~ +85ºC (with derating) -40ºC ~ +85ºC (non-derating) -40ºC ~ +85ºC (with derating) +100ºC -55ºC ~ +105ºC 12ºC/watt 10ºC/watt MIL-STD-810D 10~55Hz, 2G, 30minutes along X,Y and Z 5% to 95% RH INPUT SPECIFICATIONS Input voltage range FDC05 FDC05W Input filter Input surge voltage 100mS max Input reflected r.


FDC05-48S120 FDC05 DMB51CM24


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)