Document
87C196KT Advanced 16-BIT CHMOS Microcontroller
Automotive
Product Features
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Production Datasheet
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■
Powerdown and Idle Modes –40°C to +125°C Ambient High Performance CHMOS 16-Bit CPU Up to 32 Kbytes of On-Chip EPROM Up to 1 Kbyte of On-Chip Register RAM Up to 512 Bytes of Additional RAM (Code RAM) Register-Register Architecture 8 Channel/10-Bit A/D with Sample/Hold Programmable A/D Conversion and S/H Times 37 Prioritized Interrupts Up to Seven 8-Bit (56) I/O Ports Full Duplex Serial I/O Port Dedicated Baud Rate Generator Synchronous/Asynchronous Serial I/O Port (with Dedicated 16-Bit Baud Rate Generator) Interprocessor Communication Slave Port Selectable Bus Timing Modes for Flexible Interfacing
Oscillator Fail Detection Circuitry Total Utilization of ALL Available Pins (I/O Mux'd with Control) High Speed Peripheral Transaction Server (PTS) Two Dedicated 16-Bit High-Speed Compare Registers 10 High Speed Capture/Compare (EPA) Full Duplex Synchronous Serial I/O Port (SSIO) Two Flexible 16-Bit Timer Counters Flexible 8-/16-Bit External Bus (Programmable) “Windowing” Allows 8-Bit Addressing to some 16-Bit Addresses Programmable Bus (HLD/HLDA) 1.4 µs 16 x 16 Multiply 2.4 µs 32/16 Divide 68-Pin PLCC Package 16 MHz Operation
Notice: This document contains information on products in full production. The specifications are subject to change without notice. Verify with your local Intel sales office that you have the latest datasheet before finalizing a design.
Order No: 273178-002 www.DataSheet4U.com August 2004
www.DataSheet4U.com
www.DataSheet4U.com
87C196KT 16 MHz - Automotive
Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The 87C196KT 16 MHz - Automotive may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained from: Intel Corporation PO Box 5937 Denver CO 80217-9808 call 1-800-548-4725 Copyright © Intel Corporation 1997, 2004 *Third-party brands and names are the property of their respective owners.
ii
Production Datasheet
87C196KT 16 MHz - Automotive
Contents
1.0
1.1
Introduction ............................................................................................................. 1
New Instructions.............................................................................................. 1 1.1.1 SFR Operations.................................................................................. 1
2.0 3.0 4.0
4.1 4.2 4.3 4.4 4.5 4.6
Block Diagram ........................................................................................................ 2 Pin Description ...................................................................................................... 4 Electrical Characteristics .................................................................................. 7
DC Characteristics .......................................................................................... 7 AC Characteristics......................................................................................... 10 4.2.1 Test Conditions ................................................................................ 10 Bus Mode 1 - AC Characteristics .................................................................. 15 4.3.1 Test Conditions: ............................................................................... 15 Bus Mode 1 - HOLD#/HOLDA# Timings ....................................................... 17 4.4.1 Test Conditions: ............................................................................... 17 Bus Mode 2 - AC Characteristics ..........................