Byte Flash. TINY15L Datasheet

TINY15L Flash. Datasheet pdf. Equivalent

Part TINY15L
Description 8-bit AVR Microcontroller with 1K Byte Flash
Feature ( DataSheet : www.DataSheet4U.com ) Features • High-performance, Low-power AVR® 8-bit Microcontroll.
Manufacture ATMEL Corporation
Datasheet
Download TINY15L Datasheet

( DataSheet : www.DataSheet4U.com ) Features • High-perform TINY15L Datasheet
Recommendation Recommendation Datasheet TINY15L Datasheet




TINY15L
( DataSheet : www.DataSheet4U.com )
Features
High-performance, Low-power AVR® 8-bit Microcontroller
Advanced RISC Architecture
90 Powerful Instructions Most Single Clock Cycle Execution
32 x 8 General Purpose Working Registers
Fully Static Operation
Nonvolatile Program and Data Memories
1K Byte In-System Programmable Flash Program Memory
Endurance: 1,000 Write/Erase Cycles
64 Bytes EEPROM
Endurance: 100,000 Write/Erase Cycles
Programming Lock for Flash Program Data Security
Peripheral Features
Interrupt and Wake-up on Pin Change
Two 8-bit Timer/Counters with Separate Prescalers
One 150 kHz, 8-bit High-speed PWM Output
4-channel 10-bit ADC
One Differential Voltage Input with Optional Gain of 20x
On-chip Analog Comparator
Programmable Watchdog Timer with On-chip Oscillator
Special Microcontroller Features
In-System Programmable via SPI Port
Enhanced Power-on Reset Circuit
Programmable Brown-out Detection Circuit
Internal, Calibrated 1.6 MHz Tunable Oscillator
Internal 25.6 MHz Clock Generator for Timer/Counter
External and Internal Interrupt Sources
Low-power Idle and Power-down Modes
Power Consumption at 1.6 MHz, 3V, 25°C
Active: 3.0 mA
Idle Mode: 1.0 mA
Power-down: < 1 µA
I/O and Packages
8-lead PDIP and 8-lead SOIC: 6 Programmable I/O Lines
Operating Voltages
2.7V - 5.5V
Internal 1.6 MHz System Clock
Pin Configuration
PDIP/SOIC
(RESET/ADC0) PB5
(ADC3) PB4
(ADC2) PB3
GND
1
2
3
4
8 VCC
7 PB2 (ADC1/SCK/T0/INT0)
6 PB1 (AIN1/MISO/OC1A)
5 PB0 (AIN0/AREF/MOSI)
8-bit
Microcontroller
with 1K Byte
Flash
ATtiny15L
www.DataSheet4U.com
Rev. 1187DS12/01
www.DataSheet4U.com
Note: This is a summary document. A complete document is 1
available on our web site at www.atmel.com.



TINY15L
Description
The ATtiny15L is a low-power CMOS 8-bit microcontroller based on the AVR RISC
architecture. By executing powerful instructions in a single clock cycle, the ATtiny15L
achieves throughputs approaching 1 MIPS per MHz allowing the system designer to
optimize power consumption versus processing speed.
The AVR core combines a rich instruction set with 32 general purpose working registers.
All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing
two independent registers to be accessed in one single instruction executed in one clock
cycle. The resulting architecture is more code efficient while achieving throughputs up to
ten times faster than conventional CISC microcontrollers.
The ATtiny15L provides 1K byte of Flash, 64 bytes EEPROM, six general purpose I/O
lines, 32 general purpose working registers, two 8-bit Timer/Counters, one with high-
speed PWM output, internal oscillators, internal and external interrupts, programmable
Watchdog Timer, 4-channel 10-bit Analog-to-Digital Converter with one differential volt-
age input with optional 20x gain, and three software-selectable Power-saving modes.
The Idle mode stops the CPU while allowing the ADC, analog comparator,
Timer/Counters and interrupt system to continue functioning. The ADC Noise Reduction
mode facilitates high-accuracy ADC measurements by stopping the CPU while allowing
the ADC to continue functioning. The Power-down mode saves the register contents but
freezes the oscillators, disabling all other chip functions until the next interrupt or hard-
ware reset. The wake-up or interrupt on pin change features enable the ATtiny15L to be
highly responsive to external events, still featuring the lowest power consumption while
in the Power-saving modes.
The device is manufactured using Atmels high-density, nonvolatile memory technology.
By combining a RISC 8-bit CPU with Flash on a monolithic chip, the ATtiny15L is a pow-
erful microcontroller that provides a highly flexible and cost-efficient solution to many
embedded control applications. The peripheral features make the ATtiny15L particularly
suited for battery chargers, lighting ballasts and all kinds of intelligent sensor
applications.
The ATtiny15L AVR is supported with a full suite of program and system development
tools including macro assemblers, program debugger/simulators, In-circuit emulators
and evaluation kits.
2 ATtiny15L
1187DS12/01





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)