SM7744H

(DataSheet:www.DataSheet4U.com) SM7700H SERIES n n CMOS COMPATIBLE WITH TRI−STATE OUTPUT SURFACE MOUNT OSCILLATORS IN CERAMIC PACKAGE (7x5x1.9 mm) STANDARD SPECIFICATIONS: Frequency Range Frequency Stability over Operating Temperature Range Operating Temperature Range Operable Supply Voltage (Vcc) Symmetry (Duty Cycle) (See next page for definition.) Input Current (Icc) & Rise & Fall Time (Tr & Tf) & Jitter Logic “1” & Logic “0” (See next page) Output Load Tri-state Output Packaging (see page R1, Figure 4) 1.500 MHz – 69.999 MHz (Consult factory for specific available frequencies) ± 50 PPM is standard, but ± 25 PPM is also available for certain frequencies. 0 - 70°C is standard, but can be extended to − 40 to +85°C for certain frequencies 5 Volt ± 10% is standard, but 3.3 Volt ± 10% also available 40/60 - 60/40% is standard, but 45/55% symmetry at 50% of Vcc is also available. Depends on frequency and output load. See next page. 90% of Vcc MIN.; 10% of Vcc MAX. 15 pF is standard. Contact factory for heavier loads. Normal output when pin #1 is open (no connection); Normal output when pin #1 is at logic “1”; High-Impedance Output when pin #1 is at logic “0”. 16 mm tape, 178 mm, 254 mm or 330 mm reel: 1000 parts per reel. For quantities <250: 100 parts per tray PART NUMBERING GUIDE: n The Pletronics part number for an SM7700H series oscillator consists of the following 3 elements: 1. Overall Frequency Stability over Operating Temperature Range: SM7745H: ± 50 PPM; SM7744H: ± 25...