PM25LV040

( DataSheet : www.DataSheet4U.com ) PMC FEATURES • Single Power Supply Operation - Low voltage range: 2.7 V - 3.6 V Memory Organization - Pm25LV010: 128K x 8 (1 Mbit) - Pm25LV020: 256K x 8 (2 Mbit) - Pm25LV040: 512K x 8 (4 Mbit) Pm25LV010 / 020 / 040 1 Mbit / 2 Mbit / 4 Mbit 3.0 Volt-only, Serial Flash Memory With 33 MHz SPI Bus Interface • Sector, Block or Chip Erase Operation - Typical 40 ms sector, block or chip erase • Software Write Protection - The Block Protect (BP2, BP1, BP0) bits allow partial or entire memory to be configured as read-only • Hardware Write Protection - Protect and unprotect the device from write operation by Write Protect (WP#) Pin • Low Power Consumption - Typical 10 mA active read current - Typical 15 mA program/erase current • High Product Endurance - Guarantee 100,000 program/erase cycles per single sector - Minimum 20 years data retention • Industrial Standard Pin-out and Package - 8-pin 150mil SOIC - 8-pin 208mil SOIC for Pm25LV040 - 8-contact WSON - Optional lead-free (Pb-free) package • Cost Effective Sector/Block Architecture - 1Mb : Uniform 4Kbyte sectors / Four uniform 32Kbyte blocks - 2Mb : Uniform 4Kbyte sectors / Four uniform 64Kbyte blocks - 4Mb : Uniform 4Kbyte sectors / Eight uniform 64Kbyte blocks - Bottom sector is configurable as one 4Kbyte sector or four 1Kbyte sectors • Serial Peripheral Interface (SPI) Compatible - Supports SPI Modes 0 (0,0) and 3 (1,1) - Maximum 33 MHz clock rate for fast read - Maximum 33 MHz clock rate...