Operational Amplifiers. MC33202 Datasheet

MC33202 Amplifiers. Datasheet pdf. Equivalent


ON Semiconductor MC33202
MC33201, MC33202,
MC33204, NCV33202,
NCV33204
Low Voltage, Rail-to-Rail
Operational Amplifiers
The MC33201/2/4 family of operational amplifiers provide
rail−to−rail operation on both the input and output. The inputs can be
driven as high as 200 mV beyond the supply rails without phase
reversal on the outputs, and the output can swing within 50 mV of each
rail. This rail−to−rail operation enables the user to make full use of the
supply voltage range available. It is designed to work at very low
supply voltages (± 0.9 V) yet can operate with a supply of up to +12 V
and ground. Output current boosting techniques provide a high output
current capability while keeping the drain current of the amplifier to a
minimum. Also, the combination of low noise and distortion with a
high slew rate and drive capability make this an ideal amplifier for
audio applications.
Features
Low Voltage, Single Supply Operation
(+1.8 V and Ground to +12 V and Ground)
Input Voltage Range Includes both Supply Rails
Output Voltage Swings within 50 mV of both Rails
No Phase Reversal on the Output for Over−driven Input Signals
High Output Current (ISC = 80 mA, Typ)
Low Supply Current (ID = 0.9 mA, Typ)
600 W Output Drive Capability
Extended Operating Temperature Ranges
(−40° to +105°C and −55° to +125°C)
Typical Gain Bandwidth Product = 2.2 MHz
NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
These are Pb−Free Devices
http://onsemi.com
8
1
8
1
8
1
PDIP−8
P, VP SUFFIX
CASE 626
SOIC−8
D, VD SUFFIX
CASE 751
Micro8]
DM SUFFIX
CASE 846A
14
1
14
1
PDIP−14
P, VP SUFFIX
CASE 646
SOIC−14
D, VD SUFFIX
CASE 751A
14
1
TSSOP−14
DTB SUFFIX
CASE 948G
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 11 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
April, 2014 − Rev. 17
1
Publication Order Number:
MC33201/D


MC33202 Datasheet
Recommendation MC33202 Datasheet
Part MC33202
Description (MC33201 - MC33204) Rail-to-Rail Operational Amplifiers
Feature MC33202; MC33201, MC33202, MC33204, NCV33202, NCV33204 Low Voltage, Rail-to-Rail Operational Amplifiers The .
Manufacture ON Semiconductor
Datasheet
Download MC33202 Datasheet




ON Semiconductor MC33202
MC33201, MC33202, MC33204, NCV33202, NCV33204
MC33201
All Case Styles
NC 1
8 NC
Inputs
2
3
7 VCC
6 Output
VEE 4
5 NC
(Top View)
MC33202
All Case Styles
PIN CONNECTIONS
MC33204
All Case Styles
Output 1 1
2
Inputs 1
3
VCC 4
5
Inputs 2
6
Output 2 7
1
2
14 Output 4
4
13
Inputs 4
12
11 VEE
10
3
Inputs 3
9
8 Output 3
(Top View)
Output 1 1
Inputs 1
2
3
VEE 4
8 VCC
7 Output 2
1
6
2
Inputs 2
5
(Top View)
VCC
VCC
VCC
Vin -
Vin +
VEE
VCC
Vout
VEE
This device contains 70 active transistors (each amplifier).
Figure 1. Circuit Schematic
(Each Amplifier)
http://onsemi.com
2



ON Semiconductor MC33202
MC33201, MC33202, MC33204, NCV33202, NCV33204
MAXIMUM RATINGS
Rating
Supply Voltage (VCC to VEE)
Input Differential Voltage Range
Common Mode Input Voltage Range (Note 2)
Output Short Circuit Duration
Maximum Junction Temperature
Storage Temperature
Maximum Power Dissipation
Symbol
VS
VIDR
VCM
ts
TJ
Tstg
PD
Value
+13
Note 1
VCC + 0.5 V to
VEE − 0.5 V
Note 3
+150
− 65 to +150
Note 3
Unit
V
V
V
sec
°C
°C
mW
DC ELECTRICAL CHARACTERISTICS (TA = 25°C)
Characteristic
VCC = 2.0 V
Input Offset Voltage
VIO (max)
MC33201
MC33202, NCV33202
MC33204, NCV33204
± 8.0
±10
±12
VCC = 3.3 V
± 8.0
±10
±12
Output Voltage Swing
VOH (RL = 10 kW)
VOL (RL = 10 kW)
1.9 3.15
0.10 0.15
Power Supply Current
per Amplifier (ID)
1.125
1.125
Specifications at VCC = 3.3 V are guaranteed by the 2.0 V and 5.0 V tests. VEE = GND.
VCC = 5.0 V
± 6.0
± 8.0
±10
4.85
0.15
1.125
Unit
mV
Vmin
Vmax
mA
DC ELECTRICAL CHARACTERISTICS (VCC = + 5.0 V, VEE = Ground, TA = 25°C, unless otherwise noted.)
Characteristic
Figure Symbol Min Typ
Max Unit
Input Offset Voltage (VCM 0 V to 0.5 V, VCM 1.0 V to 5.0 V)
MC33201:
TA = + 25°C
MC33201:
TA = − 40° to +105°C
MC33201V:
TA = − 55° to +125°C
MC33202/NCV33202: TA = + 25°C
MC33202/NCV33202: TA = − 40° to +105°C
MC33202V:
TA = − 55° to +125°C
NCV33202V:
TA = − 55° to +125°C (Note 4)
MC33204:
TA = + 25°C
MC33204:
TA = − 40° to +105°C
MC33204V:
TA = − 55° to +125°C
NCV33204:
TA = − 55° to +125°C
3 VIO
mV
− − 6.0
− − 9.0
− − 13
− − 8.0
− − 11
− − 14
− − 14
− − 10
− − 13
− − 17
− − 17
Input Offset Voltage Temperature Coefficient (RS = 50 W)
TA = − 40° to +105°C
TA = − 55° to +125°C
4 DVIO/DT
mV/°C
− 2.0 −
− 2.0 −
Input Bias Current (VCM = 0 V to 0.5 V, VCM = 1.0 V to 5.0 V)
TA = + 25°C
TA = − 40° to +105°C
TA = − 55° to +125°C
5, 6 IIB
nA
− 80 200
− 100 250
− − 500
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. The differential input voltage of each amplifier is limited by two internal parallel back−to−back diodes. For additional differential input voltage
range, use current limiting resistors in series with the input pins.
2. The input common mode voltage range is limited by internal diodes connected from the inputs to both supply rails. Therefore, the voltage
on either input must not exceed either supply rail by more than 500 mV.
3. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded. (See Figure 2)
4. All NCV devices are qualified for Automotive use.
http://onsemi.com
3







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)